Air Time Remaining
The Air Time Remaining feature calculates current depth, tank pressure, your breathing rate, ascent time, and decompression status to tell you exactly how much time you can remain underwater. The ATMOS Ai v.2 continually displays Air Time Remaining via a numerical bar graph in addition to cylinder pressure. You may also display Air Time Remaining in oversized digits at any time with the press of a button.Dive Time RemainingDive Time Remaining, like Air Time Remaining provides a 'real' number in minutes. This calculation combines Air Time Remaining, Nitrogen and Oxygen absorption, displaying whichever allows less time.
When shopping for a new dive computer, compare the displays. When it comes to viewing critical information, which would you rather see at 100 feet?
Water or Manual Activation
Is it a good idea to check your computer before entering the water? You bet. Could you forget to activate your computer? Sure. The ATMOS Ai v.2 features push-button or automatic activation, triggered by water contact. A benefit of push-button activation is easily verifying operation and cylinder pressure, but in case you forget, or simply choose not to activate your computer, it can be as simple as jumping in the water.
Audible Alarms with Flashing LED Warning Light
The ATMOS Ai v.2 features a variety of system and user-customized audible alarms, alerting you to situations that pose a potential danger, or simply serve as a convenient reminder.
Air or Nitrox
The ATMOS Ai v.2 acts simply as an ‘Air’ computer until you tell it otherwise, whether that is this weekend or 2 years down the road. As your training and experience grow, the ATMOS Ai v.2 is designed to grow with you, being easily programmed for Nitrox mixtures from 21% to 50%.
AERIS Dive Computer Algorithm
Decompression theory can be trusted only as far as it has been demonstrated by actual test dive data. In 1987 a unique series of experiments were conducted by Diving Science and Technology (DSAT). Commissioned by the Professional Association of Diving Instructors (PADI), these Doppler ultrasound monitored human experiments conducted by Dr. Michael Powell produced the most comprehensive data set that exists for recreational divers to this day. These data were used to validate the PADI Recreational Dive Planner and are the basis of the algorithm used in all AERIS Dive Computers.
Diving By The Colors
AERIS Dive Computers are designed with color-coded bar graphs; green, yellow and red. These graphs monitor three very important diving parameters; nitrogen accumulation, oxygen loading and your personal ascent rate. Pixels build up in each of these color-coded areas to give you a quick, easy reference of these perameters. Proper monitoring of these graphs allows you to select the personal degree of conservatism you wish to build into each dive, putting you in control of your margin of safety.
Automatic Safety Stop Prompt
A brief audible and visual alarm remind you as you approach 15 feet. An automatic 3-minute timer counts down to zero. As in any other dive mode, you still have access to other pieces of information, and there is no penalty should you choose to disregard the safety stop.
Interactive Menu System
Speed through menu items and set modes easily and quickly with AERIS’s intuitive dual button operation.
Date and Time Stamp
The ATMOS Ai v.2 features time of day on the surface as well as underwater for quick reference. Time and date stamp also helps you to easily identify specific dives in Log Mode or PC download memory.
User Friendly Mode Icons
All AERIS computers feature bar graphs and universal icons that help you to quickly understand the information displayed on the screen at a glance.
Graphic User Interface™
Using the recognizable logic of green, yellow and red color-coding in conjunction with bar graphs, the diver has at-a-glance information. As easy to understand as a traffic light, the Graphic Diver Interface helps you to easily monitor No-Decompression status, Oxygen Accumulation, Ascent Rate, and Air Time Remaining.
Automatic Altitude Compensation
All AERIS computers automatically compensate for altitude up to 14,000 feet, giving adjusted no-decompression times and depths. They even automatically recalibrate the depth display for freshwater instead of seawater.
All AERIS computers feature diver replaceable batteries. This can be a real trip-saver on board a live-aboard boat! Battery Hot Swap™
An added benefit to diver replaceable batteries. The “hot-swap” feature allows you to change batteries between dives while maintaining all calculations.
24-Hour Fly Countdown and Calculated Desaturation Time
The ATMOS Ai v.2 features both a dual 12-hour countdown timer and calculated Desaturation Time, the theoretical time required to off-gas all residual nitrogen at sea level.
Variable Ascent Rate Indicator™
Some computers simply flash an icon, telling you that you’re ascending too quickly. The ATMOS Ai v.2’s Variable Ascent Rate Indicator bar graph acts as a speedometer, allowing you to very precisely control your ascent rate via the green, yellow, and red bar graph.
Depth-Dependent Ascent Rate
The ATMOS Ai v.2 features a depth-dependant ascent rate, allowing increased rates at deeper depths and providing additional safety as you near the surface.
The ATMOS Ai v.2 features an intense bluish green light that illuminates the entire dial of the computer evenly at the push of a button. The backlight may be activated either on the surface, or underwater and remains on for button depression time plus the duration that you choose.
20 Dive On-Unit Log Book
The ATMOS Ai v.2 features on-unit data storage capacity for 20 dives. Date and time stamp makes locating and viewing a specific dive quick and easy.
Optional Computer Interface
The ATMOS Ai v.2 features a watertight, plug-in serial connection for fast and reliable PC download. Feature-rich software provides intuitive post-dive analysis and logging. You have the option to add and/or edit many pieces of information to customize your log book, with data such as depth and decompression status during a dive, maximum depth, bottom time, air consumption, air time remaining, no-decompression status, descent and ascent rate, surface interval, and any violations recorded automatically.
Optional PC Upload
In addition to detailed dive analysis, the optional Computer Interface also allows you to quickly and easily set all of your ATMOS Ai v.2 settings and options directly through your PC.
Advanced Dive Planning Simulator
While AERIS manuals and cue cards are simple to understand, some people learn better through hands-on experience. The on-unit Simulator Mode allows you to run the ATMOS Ai v.2 through actual dive profiles including Air Dive, Nitrox, Gauge Mode, and Decompression. You will see the dive happen on the screen as you would in the water. Air consumption calculations may be activated, using a pre-set rate. As you dive the ATMOS Ai v.2, the simulated consumption rate will be updated to reflect your own average.
While this is not a substitute for reading and understanding your Owners Guide, it provides detailed dive planning, is an excellent auxiliary learning tool, and it is a great way to refresh your memory on the way to the dive site, particularly if you have not been diving for a while. A side benefit is that you can always show your dive buddy what a cool new dive computer you have!
Extended Range Gauge Mode
Divers using advanced breathing gas mixtures or otherwise conducting planned dives beyond the operational limits of the computer may utilize the ATMOS Ai v.2 as an advanced air integrated digital depth gauge and bottom timer with detailed PC Interface.
Split Set Mode Access
With a computer as advanced as the ATMOS Ai v.2, you may have to push a lot of buttons to personalize it just the way you want. We have split the set mode into two separate menus. Set Mode 1 includes Nitrox mix, maximum depth alarm, and other options that may change from dive to dive. Set Mode 2 includes units of measurement, PC sampling rate, and other personal preferences that will most likely be set once and forgotten.