|
Dive Rite Nitek Plus Computer Watch
Other products by DIVE RITE
|
Dive Rite Nitek Plus Computer Watch Dive Rite's new NiTek Plus dive computer/watch incorporates a number of advanced features in a surprisingly small package. Divers can program their NiTek Plus to dive two different gas mixtures with FO2 of the bottom mix (mix 1) from 21% to 50%, and 21% to 99% for the deco mix (mix 2).
- Monitors up to 2 different gas mixtures including nitrogen and oxygen
- Mix 1 is programmable for Nitrox mixes ranging from 21-50%
- Mix 2 is programmable for Nitrox mixes ranging from 21-99%
- Underwater gas switching with the push of a button
- Modified Buhlmann ZH-L16 algorithm
- Decompression stop times for stops as deep as 90-feet
- Oxygen exposure tracking display via FO2, PO2 and OLI (oxygen limit index) bar graph
- Visible warnings for violation of ascent rate, no decompression state, mandatory decompression stops (if necessary) and if diver has ascended above a mandatory decompression stop ceiling. Nitrox specific warnings occur if the diver exceeds a PO2 limit of 1.4 for Mix 1 and PO2 limit of 1.6 for Mix 2
- Date, time and water temperature display
- Dual time zone feature: keep time at home and at you travel destination
- Alarm clock
- Current and max depth display
- Dive time elapsed and no-decompression time remaining display
- Desaturation and time-to-fly information display
- Back lighting with 5 second LCD visible in all light conditions
- Logbook will hold up to 30 hours based (or 60 dives) on 30 second profiling intervals
- PC uploadable with NiTekLogic software and optional PC interface
- Maximum depth 328 feet (100 meters) in dive mode and 656 feet (200 meters) in gauge mode.
- Adjusts automatically for altitude up to 19,685 (6,000 meters)
- Imperial and Metric units of measure
- Lithium CR2032 battery
- 2-inch diameter X 0.6-inch high (5cm x 1.5cm)
- 4 ounces (115 grams)
Weight:
1.00 Pounds
Weight Disclaimer: *Weight may vary based on size.
|