Seac Screen Computer Wrist

Seac Screen Computer Wrist

The Seac Screen is a state-of-the-art dive computer with features that are superior to far more expensive computers, making it the best value on the market.  

This claim is supported by the "Best Buy Award" from Scuba Diver magazine's industry-standard Scuba Lab Test.

This is the ideal computer for beginners, while sporting features the serious diver will appreciate. Very easy to read even in low light, ergonomic, very easy to use with all key information on one screen, and loads of features like Nitrox. audible alarms and dive planning.

Ease of reading your critical dive data, as well as simple screen navigation, are the highlights of the fully featured Seac Screen dive computer. Contrast and brightness can be adjusted, as well as the light mode (automatic or manual) and the backlight time (from 2 sec to 60 sec). The display measures 4 x 4.7cm and is protected by a sturdy rubber housing. Total dimensions of the dial are 6.7 x 7cm.

The Seac Screen is the dive computer that aims to ease the reading of all the dive profile data. The large display shows all the main information in one view, with clearly readable and distinct characters. Contrast and brightness can be adjusted, as well as the light mode (automatic or manual) and the backlight time (from 2 sec to 60 sec). The display measures 1.57 x 1.85" (4 x 4.7cm) and is protected by a sturdy rubber housing. 

Total computer face measures 2.64 x 2.76" (6.7 x 7cm). The computer's long wrist strap is designed to wear the Seac Screen comfortably, even over a dry suit. The strap length, from the buckle to the opposite end, is 14.17" (36cm). The two well-defined front buttons allow the Screen Computer to be managed quickly and easily, even when wearing thick gloves.

The Seac Screen Wrist Dive Computer operates in 3 main modes: Scuba, Gauge, and Free-Dive. In Scuba mode, the dive profile is completely managed according to the B¼hlmann ZHL-16C decompression algorithm. It supports the management of 1 or 2 mixes (air, Nitrox, and other mixes with O2 up to 99%), notifying the user at the most suitable time to change the mix. It has sound alarms and warning lights in case of violation of the decompression stop, excessive ascent speed, and exceeding the maximum depth allowed for all mixes in use. 

In Gauge mode, the Screen Computer displays a depth gauge and stopwatch for fully independent dive management for more experienced divers. In Free-Dive mode, free divers can view surface intervals and dive times, current depth, and maximum depth reached during the session.

The Seac Screen dive planner allows you to simulate and plan a dive by displaying the No Decompression Limit (NDL) time based on a set depth and other data input (mixture, maximum PpO2, caution level). The Logbook records up to 40 hours of diving in Scuba/Gauge mode or 18 hours in Free-Dive mode. Downloadable data via USB (sold separately). Firmware update and Seac Dive Manager software are available online (free download at Seacsub.com). 

The Seac Screen is powered by a CR2450 battery and is not rechargeable. It can be replaced by the user, but it is still recommended to contact an authorized Seac center to change the battery and cover the O-ring. The computer has a maximum depth limit of 330' (100m), calculation of no-fly and desaturation times, maximum allowed altitude warning, and fresh or salt water selection. Seac Screen is also available in a 2-gauge console version with a pressure gauge (see SKU: SECSDCS). A computer comes with an owner's manual. An optional USB cable is available.

MODES:

Easy to Use, with 3 Main Modes:

Scuba Mode: Supports 1 or 2 Mixes
                         Air, Nitrox & Other Mixes w/O2 Up to 99%)
                         Sound Alarms & Warning Lights for Violations
                         Decompression Stop, Excessive Ascent Speed, Exceeding Max. Depth for Mixes-In-Use

Gauge Mode: Displays Depth Gauge & Stopwatch
                          Fully Independent Dive Management
                          Designed for More Experienced Divers

Free-Dive Mode: View Surface Intervals & Dive Times
                                Current Depth
                                Maximum Depth Reached During Session

Ease of Reading: The large display shows all the main information in one view, with clearly readable and distinct characters. Contrast and brightness can be adjusted, as well as the light                                        mode (automatic or manual) and the backlight time (from 2 sec to 60 sec).

Dive Manager:

                             Dive Manager software for MAC/PC (requires Windows 10), available free of charge at Seacsub.com. Download data via USB cable (optional accessory).

Key Features:

TO SEE AND READ ALL FEATURES AND SPECS, PLEASE CLICK ON THE MORE INFORMATION TAB TO THE LEFT