Includes: XS Scuba PVD PRO Valve, Tank, Current Hydro, VIP and Tank boot
Faber Steel Cylinders Feature:
Hot-dip Galvanizing offers the highest level of protection against corrosion and unparalleled protection for SCUBA Cylinders. However, they do come with a caveat. Cylinders that have been finished with the Hot-dipped galvanizing process often result in small blemishes and variations in color that is not as smooth as a painted finish. Over time, these blemishes will settle into a semi-uniform, silver, “mottled” appearance. Please understand and take this into account when making your cylinder selection.
|Stated Volume||80 cu ft||100 cu ft||120 cu ft||117 cu ft||133 cu ft|
|True Capacity||81.7 cu ft / 10.2 liters||101.3 cu ft / 12.9 liters||120.1 cu ft / 15.3 liters||117.8 cu ft / 15 liters||133.5 cu ft / 17 liters|
|Service Pressure||3442 psi / 237 bar||3442 psi / 237 bar||3442 psi / 237 bar||3442 psi / 237 bar||3442 psi / 237 bar|
|**Buoyancy Full||- 8.05 lbs / -3.65 kg||- 8.41 lbs / -3.81 kg||- 8.82 lbs / -4.13 kg||- 9.12 lbs / -4.13 kg||- 9.08 lbs / 0.66 kg|
|**Buoyancy Empty||- 1.74 lbs / -0.79||-0.59 lbs / -0.15||0.65 lbs / 0.29||0.35 lbs / 0.16||1.45 lbs / 0.66|
|Weight Empty||28.3 lbs / 13.0 kg||34.0 lbs / 15.6 kg||39.2 lbs / 17.8 kg||37.6 lbs / 17.7 kg||42.4 lbs / 19.4 kg|
|Outside Diameter||7.25” / 184 mm||7.25” / 184 mm||7.25” / 184 mm||8.00” / 203 mm||8.00” / 203 mm|
|Length||20.8” / 53.0 cm||25.3” / 64.5 cm||29.1” / 74.5 cm||24.2” / 61.5 cm||26.85” / 68.0 cm|
|REE||68 cc||86 cc||100 cc||100 cc||113 cc|
|HYDRO DATES ON NEW FABER STEEL CYLINDERS||OXYGEN USE WITH FABER STEEL CYLINDERS|
We ship cylinders with the “freshest” possible hydro date. We are limited in some models because of high manufacturing quantities and relatively low sales volume. Please understand, that steel cylinders shipped to your location within 18 months from date of manufacture are considered “current hydro” and not subject to further discounts.
Faber steel cylinders are cleaned at the factory for oxygen-enriched service up to 40% pre-blended nitrox. If you intend to use this cylinder for oxygen-enriched service, it is the responsibility of the cylinder user to ensure that the cylinder and all components are maintained in a proper state of oxygen cleanliness in strict accordance with regulatory requirements and industry standards.