SPACE EXTENDER 100
SPACE EXTENDER Diving Full Face Mask 100% O2 compatible with integrated 2nd stage, surface air valve and O2 clean viton o-rings. This is an upgrade to superior comfort, performance and versatility. Just like any other SPACE EXTENDER IDM, the SPACE EXTENDER 100 comes with the full EXTENDER KIT of frame, earphone supports and new NACS for full customization.
Space Extender, is the mask for the avid diver, advanced adventurer and diving professional. Cold water certified, balanced, on demand, integrated regulator. Polycarbonate visor (siloxane double coated for scratch resistance). Directional exhaust valve (4 positions). Dive / pre dive switch. Lifetime warranty! Includes the Extender Kit (frame + accessories). SAV (Surface Air Valve) included. This IDM has it all right off the bat. A fully customizable product that can serve all your needs and grow with your preferences thanks to a full line of accessories that can be integrated at any time with your mask. Specifically designed for long and/or deep dives – all those applications where high percentages of O2 are needed.
This mask features:
It comes with:
The majority of the models may be supplied with two sizes: Small/Medium and Medium/Large. In order to determine whether a diver should wear a S/M or M/L mask, OCEAN REEF has designed a Mask Measuring Kit (code 33075).
The sizing and measuring system were designed in accordance with the official measuring procedure used in the Los Alamos Scientific Laboratory Charts at the SBCCOM Mask Fit Facility-Aberdeen Proving Ground (Maryland, USA). Before purchasing a mask, use the caliper to take two simple face measurements. Using the Full Face Mask Size Recommendation Chart, it is possible to evaluate the size category into which the measurements fall.
There are three different size categories on the chart: Small/Medium, Both, and Medium/Large. If the measurements fall within the both category, then the customer should technically be able to wear either size (MEDIUM/LARGE or SMALL/MEDIUM), and in that case they should try on a mask to select the best fit. Please note that the chart boundaries fade. The fading areas represent less common face measurements. It is very likely that a mask will still fit comfortably even if measurements are located in these fading areas.
Visual Field
The Neptune Space visor is made of transparent polycarbonate. It is designed to be wider and sit closer to the face than previous full face masks. This design maximizes the visual field, particularly the peripheral area. The visible light transfer of the visor is 92%.
Required field of vision (effective) >40% of the natural field of vision – Space masks 71.80%.
Required field of vision (binocular) >50% of binocular natural field of vision – Space masks 80.68%
Italcert certification PPE-05 Rif 1332/05
The insert photos show the visual field of the Neptune Space compared with two competitor’s full face masks.
Durability and scratching resistance
The visor of the Neptune Space can resist the impact of a 6.35 mm steel ball traveling at speeds of 540 kph (335 mph). The visor is coated on both sides with a siloxane resin to increase the scratching and chemical resistance.
Tested by STANAG 4296 = resistance to the impact of a 325mg metal fragment with a speed of 240 m/s and Impact resistance test: 39.3 mm/254 g sphere from 1300 mm, no cracking or added protection during transport, the Neptune Space comes with a removable protective shield (to be removed before diving).
The head harness and FRB II
The head harness is directly attached to the face shield, allowing pressure to be distributed equally along the mask skirt. The six straps of the head harness hold the mask in a firm position due to their low elasticity. The tip of each strap (rubber) is wider, making them easier to
grasp while wearing neoprene gloves. The FRB II (Raptor and Space Fast Rotating Buckle) allows the mask to be donned and doffed quickly. Predator and IRON MASK use an AISI 316 stainless steel with surface electric treatment and AISI 316 stainless steel rollers.
| Product Category | Fullface & Communications |
|---|---|
| Filter U/W Communications | Full Face Masks |
| SKU | OCR-OR02510X |
| Condition | New |
| Brand | Ocean Reef |
| Sizing |
PERFECT FIT? Available in two sizes, Small/Medium and Medium/Large.The sizing and measuring system were designed in accordance with the official measuring procedure used in the Los Alamos Scientific Laboratory Charts at the SBCCOM Mask Fit Facility-Aberdeen Proving Ground (Maryland, USA). Before purchasing a mask, the customer may use the calliper to take two simple face measurements. Using the Full Face Mask Size Recommendation Chart, he or she can evaluate the size category into which the measurements fall. There are three different size categories on the chart: Small/Medium, Both, & Medium/Large. If the measurements fall within the both category, then the diver should technically be able to wear either full face mask (M/L or S/M), and in that case should try on a mask to select the best fit. Please note that the chart boundaries fade. The fading areas represent less common face measurements. It is very likely that a mask will still fit comfortably even if measurements are located in these fading areas.If needed, OCEAN REEF has available to purchase a measuring kit.
|
| Clearance | New- While Supplies Last |
PERFECT FIT?
Available in two sizes, Small/Medium and Medium/Large.The sizing and measuring system were designed in accordance with the official measuring procedure used in the Los Alamos Scientific Laboratory Charts at the SBCCOM Mask Fit Facility-Aberdeen Proving Ground (Maryland, USA). Before purchasing a mask, the customer may use the calliper to take two simple face measurements. Using the Full Face Mask Size Recommendation Chart, he or she can evaluate the size category into which the measurements fall. There are three different size categories on the chart: Small/Medium, Both, & Medium/Large. If the measurements fall within the both category, then the diver should technically be able to wear either full face mask (M/L or S/M), and in that case should try on a mask to select the best fit. Please note that the chart boundaries fade. The fading areas represent less common face measurements. It is very likely that a mask will still fit comfortably even if measurements are located in these fading areas.If needed, OCEAN REEF has available to purchase a measuring kit.
1.800.999.3483
