Cressi Desert DrySuit 4mm Man

Product Description

CRESSI 4MM DESERT MENS DRYSUIT

The Desert drysuit is an excellent choice for scuba diving, designed for both beginners and diving enthusiasts.

In addition to its high finish quality in terms of seams, heat-sealing, and patterned design, Desert stands out for the use of neoprene pre-compressed from 7 to 4 mm.

This neoprene has the advantage of excellent thermal protection in the base due to its incompressibility, in addition to a reduced weight belt requirement.

Also reduces the need to use large undergarments, as with trilaminate suits.

The Cressi Desert 4mm Dry Suit is comfortable and resistant thanks to its 4mm thick high-density pre-compressed neoprene and liquid seal protected stitched joints. The seams and outer neoprene lining are covered with a special layer of elastomer, creating an impermeable barrier to water while also increasing resistance at the joints. On the inside, an additional sealing strip guarantees total waterproofability. This double-sealing system has been carefully designed to meet the needs of the most discerning and seasoned divers who often require their dry suits to be able to adapt to extreme working or weather conditions. The special Spanflex material has also been used in the outer part to increase elasticity and abrasion resistance. The cuffs are made of smooth 3.5mm-thick neoprene on the inside in order to improve seal ability and from Ultraspan on the outside in order to improve elasticity. The collar is made of the same materials but with 2.5mm thick neoprene for more comfort and breathability when turned up. The shoulder, neck, and knee lines are reinforced with a special anti-abrasion X-Diamond Pad lining. The suit comes with a practical multipurpose pocket placed on the right leg, as well as a comfortable hood.

Suit comes equipped with attached soft neoprene socks, has an internal suspender system, and a fly with a concealed zipper. Side action rotating inflation valve adds comfort and won't pull with torso movement. Adjustable discharge relief valve for precise venting of suit air for better buoyancy control. A 3/8" threaded quick-disconnect hose comes standard with the Cressi Desert 4mm Dry Suit. Liquid Seal Technology: A layer of polymer is spread along the seams to protect and seal them, thereby increasing the resistance to wear, the lifetime of the suit, and its insulating power. The suit's zipper closure and high-volume pocket come with a D-ring and hood holder for added convenience. Suit has a cross shoulder zipper closure for donning and doffing. The dry suit is black in color and comes in multiple sizes.

FEATURES:

Desert Men's 4mm Dry Suit: Comfortable & Resistant Designed Suit
4mm Thick High-Density Pre-Compressed Neoprene
Liquid Seal Protected Stitched Seam Joints: Seams & Outer Neoprene Lining Covered w/Special Layer of Elastomer
Simultaneously Create Impermeable Obstacle for Water & Increased Resistance at Seam Joints
Inside, Additional Sealing Strip Guarantees Total Waterproof-Ability
Double Sealing System: Carefully Designed to Meet Needs of Most Discerning/Seasoned Divers
Divers Requiring Their Dry Suit Able to Adapt to Extreme Working or Weather Conditions
Spanflex Exterior Material: Increase Elasticity & Abrasion Resistance
Cuffs: Made of Smooth 3.5mm Neoprene On-Inside
Improve Seal Ability
Ultraspan On-Outside
Improved Elasticity
Collar: Made of Same Materials-As-Cuffs But w/2.5mm Neoprene
More Comfort & Breathability when Turned-Up
Shoulder, Neck & Knee Lines: Reinforced w/Anti-Abrasion X-Diamond Pad Lining
Attached Soft Neoprene Socks
Internal Suspender System
Fly w/Concealed Zipper
Side Action Rotating Inflation Valve
Adjustable Discharge Relief Valve
3/8" Threaded Quick-Disconnect Hose
Large Zippered Pocket: D-Ring & Hood Holder, Add Convenience
Cross-Shoulder Zipper Closure
Hood Included
Color: Black
Available-In Multiple Sizes
4mm high-density neoprene in this dry suit offers superior warmth and insulation.
Enjoy great flexibility and fit with pre-compressed neoprene in this Cressi drysuit.
Smooth neoprene cuffs and collar on this diving drysuit ensure a comfortable water seal.
Metal zipper and reinforced seams enhance the durability of this Cressi dry suit.
Includes a handy thigh pocket with a D-ring for secure gear storage while diving.
Internal suspenders provide a snug fit, enhancing comfort in your 4mm drysuit.
What's in the Box: Desert Men's 4mm Dry Suit
Quick-Disconnect Hose
Hood
MFG 2 Year Limited Warranty

Product Description

Cressi Desert Drysuit 4mm Man

In addition to its high finish quality in terms of seams, heat-sealing and patterned design, the Desert stands out for the use of Neoprene pre-compressed from 7 to 4 mm. This Neoprene has the advantage of excellent thermal protection in the base due to its incompressibility in addition to a reduced weight belt requirement. It also reduces the need to use large undergarments as with trilaminate suits. The rigidity of this type of neoprene has been compensated with the use of exterior lining Ultraspan© with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. In this way, we combine the comfort of a wetsuit with a premium look and outstanding technical performance. The areas with the tendency for the greatest wear are reinforced with Small Dyamond© exterior fabric: shoulders, the upper part of the chest, armpits, inseam, knees, and ankles. It features the Liquid Seal technology, used for sealing and protect the seams for a greater resistance to wear and fraying. The areas that may require repairs or replacements: sleeves, collar and booties have traditional seams to facilitate replacement if necessary. Collar and wrist seal made of 5mm (wrist) and 3 mm (collar) ultra-elastic Neoprene, with Ultraspan lining, easily replaceable in case of wearing. Sitech© valves. The inflation valve located on the chest utilizes a lateral button to avoid accidental activation, the bleed valve is located on the upper left arm. Marine brass BDM© 8 pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area. The suit entry is oversized to facilitate donning and the zipper is protected by an external flap to prevent tearing and abrasion. Neoprene hip storage pocket. The zipper is made by BDM, a brand pioneer in dry zippers for drysuits, a YKK company. The knee and tibia areas have elastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the neoprene. Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole. In this way the stocks and orders are managed, the thermal conductivity of the suit is improved, normal fin sizing is maintained and the key hard boot-calf union is avoided, one of the most common areas for breaks and water leaks in dry suits. Hood and paraffin zipstick included.

Key Features:

LIQUID SEAL sealed seams for greater resistance to wear and fraying.

Oversized suit entry to facilitate donning. The zipper is protected by an external flap to prevent tearing and abrasion

5 mm ultra-elastic neoprene wrist seals are easily replaceable in case or wear.

Sitech© valves. Inflation valve located on the the chest, utilizing a perpendicular lateral button, the bleed valve is located on the upper left arm.

Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole.

Marine brass BDM© 8tz pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area.

The tendency of compressed neoprene to be rigid is compensated by the use of internal/external Ultraspan© lining with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. We combine the comfort of a wetsuit with a premium look and outstanding technical performance.

3 mm ultra-elastic collar with 120º Anatomic Shape that contours the anatomical profile of the chest and neck.

Neoprene storage pocket on hip. YKK zipper. Security carabiner.

Hood with discreet valve system to drain extra air during ascent and suit fastening system using a small carabiner.

The knee and tibia areas haveelastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the suit.

High friction areas Small Dyamond base fabric, very resistant but flexible. The Tatex reinforcement is applied above this fabric.

Areas with greatest wear tendencies reinforced with Small Dyamond© fabric.

Product Description

Cressi Desert Drysuit 4mm Man

In addition to its high finish quality in terms of seams, heat-sealing and patterned design, the Desert stands out for the use of Neoprene pre-compressed from 7 to 4 mm. This Neoprene has the advantage of excellent thermal protection in the base due to its incompressibility in addition to a reduced weight belt requirement. It also reduces the need to use large undergarments as with trilaminate suits. The rigidity of this type of neoprene has been compensated with the use of exterior lining Ultraspan© with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. In this way, we combine the comfort of a wetsuit with a premium look and outstanding technical performance. The areas with the tendency for the greatest wear are reinforced with Small Dyamond© exterior fabric: shoulders, the upper part of the chest, armpits, inseam, knees, and ankles. It features the Liquid Seal technology, used for sealing and protect the seams for a greater resistance to wear and fraying. The areas that may require repairs or replacements: sleeves, collar and booties have traditional seams to facilitate replacement if necessary. Collar and wrist seal made of 5mm (wrist) and 3 mm (collar) ultra-elastic Neoprene, with Ultraspan lining, easily replaceable in case of wearing. Sitech© valves. The inflation valve located on the chest utilizes a lateral button to avoid accidental activation, the bleed valve is located on the upper left arm. Marine brass BDM© 8 pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area. The suit entry is oversized to facilitate donning and the zipper is protected by an external flap to prevent tearing and abrasion. Neoprene hip storage pocket. The zipper is made by BDM, a brand pioneer in dry zippers for drysuits, a YKK company. The knee and tibia areas have elastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the neoprene. Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole. In this way the stocks and orders are managed, the thermal conductivity of the suit is improved, normal fin sizing is maintained and the key hard boot-calf union is avoided, one of the most common areas for breaks and water leaks in dry suits. Hood and paraffin zipstick included.

Key Features:

LIQUID SEAL sealed seams for greater resistance to wear and fraying.

Oversized suit entry to facilitate donning. The zipper is protected by an external flap to prevent tearing and abrasion

5 mm ultra-elastic neoprene wrist seals are easily replaceable in case or wear.

Sitech© valves. Inflation valve located on the the chest, utilizing a perpendicular lateral button, the bleed valve is located on the upper left arm.

Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole.

Marine brass BDM© 8tz pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area.

The tendency of compressed neoprene to be rigid is compensated by the use of internal/external Ultraspan© lining with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. We combine the comfort of a wetsuit with a premium look and outstanding technical performance.

3 mm ultra-elastic collar with 120º Anatomic Shape that contours the anatomical profile of the chest and neck.

Neoprene storage pocket on hip. YKK zipper. Security carabiner.

Hood with discreet valve system to drain extra air during ascent and suit fastening system using a small carabiner.

The knee and tibia areas haveelastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the suit.

High friction areas Small Dyamond base fabric, very resistant but flexible. The Tatex reinforcement is applied above this fabric.

Areas with greatest wear tendencies reinforced with Small Dyamond© fabric.

Product Description

Cressi Desert Drysuit 4mm Man

In addition to its high finish quality in terms of seams, heat-sealing and patterned design, the Desert stands out for the use of Neoprene pre-compressed from 7 to 4 mm. This Neoprene has the advantage of excellent thermal protection in the base due to its incompressibility in addition to a reduced weight belt requirement. It also reduces the need to use large undergarments as with trilaminate suits. The rigidity of this type of neoprene has been compensated with the use of exterior lining Ultraspan© with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. In this way, we combine the comfort of a wetsuit with a premium look and outstanding technical performance. The areas with the tendency for the greatest wear are reinforced with Small Dyamond© exterior fabric: shoulders, the upper part of the chest, armpits, inseam, knees, and ankles. It features the Liquid Seal technology, used for sealing and protect the seams for a greater resistance to wear and fraying. The areas that may require repairs or replacements: sleeves, collar and booties have traditional seams to facilitate replacement if necessary. Collar and wrist seal made of 5mm (wrist) and 3 mm (collar) ultra-elastic Neoprene, with Ultraspan lining, easily replaceable in case of wearing. Sitech© valves. The inflation valve located on the chest utilizes a lateral button to avoid accidental activation, the bleed valve is located on the upper left arm. Marine brass BDM© 8 pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area. The suit entry is oversized to facilitate donning and the zipper is protected by an external flap to prevent tearing and abrasion. Neoprene hip storage pocket. The zipper is made by BDM, a brand pioneer in dry zippers for drysuits, a YKK company. The knee and tibia areas have elastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the neoprene. Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole. In this way the stocks and orders are managed, the thermal conductivity of the suit is improved, normal fin sizing is maintained and the key hard boot-calf union is avoided, one of the most common areas for breaks and water leaks in dry suits. Hood and paraffin zipstick included.

Key Features:

LIQUID SEAL sealed seams for greater resistance to wear and fraying.

Oversized suit entry to facilitate donning. The zipper is protected by an external flap to prevent tearing and abrasion

5 mm ultra-elastic neoprene wrist seals are easily replaceable in case or wear.

Sitech© valves. Inflation valve located on the the chest, utilizing a perpendicular lateral button, the bleed valve is located on the upper left arm.

Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole.

Marine brass BDM© 8tz pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area.

The tendency of compressed neoprene to be rigid is compensated by the use of internal/external Ultraspan© lining with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. We combine the comfort of a wetsuit with a premium look and outstanding technical performance.

3 mm ultra-elastic collar with 120º Anatomic Shape that contours the anatomical profile of the chest and neck.

Neoprene storage pocket on hip. YKK zipper. Security carabiner.

Hood with discreet valve system to drain extra air during ascent and suit fastening system using a small carabiner.

The knee and tibia areas haveelastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the suit.

High friction areas Small Dyamond base fabric, very resistant but flexible. The Tatex reinforcement is applied above this fabric.

Areas with greatest wear tendencies reinforced with Small Dyamond© fabric.

Product Description

Cressi Desert Drysuit 4mm Man

In addition to its high finish quality in terms of seams, heat-sealing and patterned design, the Desert stands out for the use of Neoprene pre-compressed from 7 to 4 mm. This Neoprene has the advantage of excellent thermal protection in the base due to its incompressibility in addition to a reduced weight belt requirement. It also reduces the need to use large undergarments as with trilaminate suits. The rigidity of this type of neoprene has been compensated with the use of exterior lining Ultraspan© with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. In this way, we combine the comfort of a wetsuit with a premium look and outstanding technical performance. The areas with the tendency for the greatest wear are reinforced with Small Dyamond© exterior fabric: shoulders, the upper part of the chest, armpits, inseam, knees, and ankles. It features the Liquid Seal technology, used for sealing and protect the seams for a greater resistance to wear and fraying. The areas that may require repairs or replacements: sleeves, collar and booties have traditional seams to facilitate replacement if necessary. Collar and wrist seal made of 5mm (wrist) and 3 mm (collar) ultra-elastic Neoprene, with Ultraspan lining, easily replaceable in case of wearing. Sitech© valves. The inflation valve located on the chest utilizes a lateral button to avoid accidental activation, the bleed valve is located on the upper left arm. Marine brass BDM© 8 pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area. The suit entry is oversized to facilitate donning and the zipper is protected by an external flap to prevent tearing and abrasion. Neoprene hip storage pocket. The zipper is made by BDM, a brand pioneer in dry zippers for drysuits, a YKK company. The knee and tibia areas have elastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the neoprene. Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole. In this way the stocks and orders are managed, the thermal conductivity of the suit is improved, normal fin sizing is maintained and the key hard boot-calf union is avoided, one of the most common areas for breaks and water leaks in dry suits. Hood and paraffin zipstick included.

Key Features:

LIQUID SEAL sealed seams for greater resistance to wear and fraying.

Oversized suit entry to facilitate donning. The zipper is protected by an external flap to prevent tearing and abrasion

5 mm ultra-elastic neoprene wrist seals are easily replaceable in case or wear.

Sitech© valves. Inflation valve located on the the chest, utilizing a perpendicular lateral button, the bleed valve is located on the upper left arm.

Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole.

Marine brass BDM© 8tz pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area.

The tendency of compressed neoprene to be rigid is compensated by the use of internal/external Ultraspan© lining with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. We combine the comfort of a wetsuit with a premium look and outstanding technical performance.

3 mm ultra-elastic collar with 120º Anatomic Shape that contours the anatomical profile of the chest and neck.

Neoprene storage pocket on hip. YKK zipper. Security carabiner.

Hood with discreet valve system to drain extra air during ascent and suit fastening system using a small carabiner.

The knee and tibia areas haveelastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the suit.

High friction areas Small Dyamond base fabric, very resistant but flexible. The Tatex reinforcement is applied above this fabric.

Areas with greatest wear tendencies reinforced with Small Dyamond© fabric.

Product Description

Cressi Desert Drysuit 4mm Man

In addition to its high finish quality in terms of seams, heat-sealing and patterned design, the Desert stands out for the use of Neoprene pre-compressed from 7 to 4 mm. This Neoprene has the advantage of excellent thermal protection in the base due to its incompressibility in addition to a reduced weight belt requirement. It also reduces the need to use large undergarments as with trilaminate suits. The rigidity of this type of neoprene has been compensated with the use of exterior lining Ultraspan© with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. In this way, we combine the comfort of a wetsuit with a premium look and outstanding technical performance. The areas with the tendency for the greatest wear are reinforced with Small Dyamond© exterior fabric: shoulders, the upper part of the chest, armpits, inseam, knees, and ankles. It features the Liquid Seal technology, used for sealing and protect the seams for a greater resistance to wear and fraying. The areas that may require repairs or replacements: sleeves, collar and booties have traditional seams to facilitate replacement if necessary. Collar and wrist seal made of 5mm (wrist) and 3 mm (collar) ultra-elastic Neoprene, with Ultraspan lining, easily replaceable in case of wearing. Sitech© valves. The inflation valve located on the chest utilizes a lateral button to avoid accidental activation, the bleed valve is located on the upper left arm. Marine brass BDM© 8 pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area. The suit entry is oversized to facilitate donning and the zipper is protected by an external flap to prevent tearing and abrasion. Neoprene hip storage pocket. The zipper is made by BDM, a brand pioneer in dry zippers for drysuits, a YKK company. The knee and tibia areas have elastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the neoprene. Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole. In this way the stocks and orders are managed, the thermal conductivity of the suit is improved, normal fin sizing is maintained and the key hard boot-calf union is avoided, one of the most common areas for breaks and water leaks in dry suits. Hood and paraffin zipstick included.

Key Features:

LIQUID SEAL sealed seams for greater resistance to wear and fraying.

Oversized suit entry to facilitate donning. The zipper is protected by an external flap to prevent tearing and abrasion

5 mm ultra-elastic neoprene wrist seals are easily replaceable in case or wear.

Sitech© valves. Inflation valve located on the the chest, utilizing a perpendicular lateral button, the bleed valve is located on the upper left arm.

Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole.

The tendency of compressed neoprene to be rigid is compensated by the use of internal/external Ultraspan© lining with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. We combine the comfort of a wetsuit with a premium look and outstanding technical performance.

3 mm ultra-elastic collar with 120º Anatomic Shape that contours the anatomical profile of the chest and neck.

Neoprene storage pocket on hip. YKK zipper. Security carabiner.

Hood with discreet valve system to drain extra air during ascent and suit fastening system using a small carabiner.

The knee and tibia areas haveelastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the suit.

High friction areas Small Dyamond base fabric, very resistant but flexible. The Tatex reinforcement is applied above this fabric.

Product Description

Cressi Desert Drysuit 4mm Man

In addition to its high finish quality in terms of seams, heat-sealing and patterned design, the Desert stands out for the use of Neoprene pre-compressed from 7 to 4 mm. This Neoprene has the advantage of excellent thermal protection in the base due to its incompressibility in addition to a reduced weight belt requirement. It also reduces the need to use large undergarments as with trilaminate suits. The rigidity of this type of neoprene has been compensated with the use of exterior lining Ultraspan© with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. In this way, we combine the comfort of a wetsuit with a premium look and outstanding technical performance. The areas with the tendency for the greatest wear are reinforced with Small Dyamond© exterior fabric: shoulders, the upper part of the chest, armpits, inseam, knees, and ankles. It features the Liquid Seal technology, used for sealing and protect the seams for a greater resistance to wear and fraying. The areas that may require repairs or replacements: sleeves, collar and booties have traditional seams to facilitate replacement if necessary. Collar and wrist seal made of 5mm (wrist) and 3 mm (collar) ultra-elastic Neoprene, with Ultraspan lining, easily replaceable in case of wearing. Sitech© valves. The inflation valve located on the chest utilizes a lateral button to avoid accidental activation, the bleed valve is located on the upper left arm. Marine brass BDM© 8 pitch zipper guarantees reliability without overly sacrificing suit elasticity in the dorsal area. The suit entry is oversized to facilitate donning and the zipper is protected by an external flap to prevent tearing and abrasion. Neoprene hip storage pocket. The zipper is made by BDM, a brand pioneer in dry zippers for drysuits, a YKK company. The knee and tibia areas have elastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the neoprene. Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole. In this way the stocks and orders are managed, the thermal conductivity of the suit is improved, normal fin sizing is maintained and the key hard boot-calf union is avoided, one of the most common areas for breaks and water leaks in dry suits. Hood and paraffin zipstick included.

Key Features:

LIQUID SEAL sealed seams for greater resistance to wear and fraying.

Oversized suit entry to facilitate donning. The zipper is protected by an external flap to prevent tearing and abrasion

5 mm ultra-elastic neoprene wrist seals are easily replaceable in case or wear.

Sitech© valves. Inflation valve located on the the chest, utilizing a perpendicular lateral button, the bleed valve is located on the upper left arm.

Booties without soles with reinforcements limited to support areas in order to not reduce the adaptability to different foot sizes. Highly abrasion-resistant Black Diamond© fabric sole.

The tendency of compressed neoprene to be rigid is compensated by the use of internal/external Ultraspan© lining with a brilliant finish, hydrodynamic gliding and great elasticity in all directions. We combine the comfort of a wetsuit with a premium look and outstanding technical performance.

3 mm ultra-elastic collar with 120º Anatomic Shape that contours the anatomical profile of the chest and neck.

Neoprene storage pocket on hip. YKK zipper. Security carabiner.

Hood with discreet valve system to drain extra air during ascent and suit fastening system using a small carabiner.

The knee and tibia areas haveelastic anti-wear Tatex® reinforcements. This type of strengthening provides sufficient strength and allows suit donning without limiting the elasticity of the suit.

High friction areas Small Dyamond base fabric, very resistant but flexible. The Tatex reinforcement is applied above this fabric.

Product Category	Dive Suits
SKU	CRS-LQ40100X
Condition	New
Brand	Cressi
Migration Dive Suits	Dry Suit , Mens, 4 to 5mm, Over 6mm
More Info	SPECS: Materials - Suit Body: 4mm High-Density Pre-Compressed Neoprene Cuffs: Smooth 3.5mm Neoprene Inside *Ultraspan On-Outside* Collar: Smooth 2.5mm Neoprene Inside *Ultraspan On-Outside* Inflator Valve - Yes Pressure Relief Valve - Yes Suspenders - Yes LP Hose = 3/8" Threaded QD Attached Boots - No, Socks Pockets - One Thigh w/Zipper Closure & D-Ring Closure - Metal Zipper Hood - Yes D-Rings - In-Pocket Entry Type - Cross Shoulder Zipper
Sizing

Cressi Desert DrySuit 4mm Man

Cressi Desert DrySuit 4mm Man Black S

Cressi Desert DrySuit 4mm Man Black M

Cressi Desert DrySuit 4mm Man Black L

Cressi Desert DrySuit 4mm Man Black XL

Cressi Desert DrySuit 4mm Man Black XXL

Cressi Desert DrySuit 4mm Man Black 3XL

Sea Elite SuperFlex 5mm Wetsuit SF50 Mens

Bare 3mm Velocity Ultra 2.0 Full Men's Blue L

Henderson Thermoprene 5mm Womens Back Zip Jumpsuit Black/Coral 6

Atlan 7MM Drysuit NDS-07

Cressi Desert DrySuit 4mm Lady

Tusa Aqua Thermal Top Womens Small

Product Description

CRESSI 4MM DESERT MENS DRYSUIT

FEATURES:

Product Description

Product Description

Product Description

Product Description

Product Description

Product Description

Product Information

Materials - Suit Body: 4mm High-Density Pre-Compressed Neoprene
Cuffs: Smooth 3.5mm Neoprene Inside
Ultraspan On-Outside
Collar: Smooth 2.5mm Neoprene Inside
Ultraspan On-Outside

Inflator Valve - Yes

Pressure Relief Valve - Yes

Suspenders - Yes

LP Hose = 3/8" Threaded QD

Attached Boots - No, Socks

Pockets - One Thigh w/Zipper Closure & D-Ring

Closure - Metal Zipper

Hood - Yes

D-Rings - In-Pocket

Entry Type - Cross Shoulder Zipper

Product FAQs

Product Reviews

Cressi Desert DrySuit 4mm Man

Cressi Desert DrySuit 4mm Man Black S

Cressi Desert DrySuit 4mm Man Black M

Cressi Desert DrySuit 4mm Man Black L

Cressi Desert DrySuit 4mm Man Black XL

Cressi Desert DrySuit 4mm Man Black XXL

Cressi Desert DrySuit 4mm Man Black 3XL

Sea Elite SuperFlex 5mm Wetsuit SF50 Mens

Bare 3mm Velocity Ultra 2.0 Full Men's Blue L

Henderson Thermoprene 5mm Womens Back Zip Jumpsuit Black/Coral 6

Atlan 7MM Drysuit NDS-07

Cressi Desert DrySuit 4mm Lady

Tusa Aqua Thermal Top Womens Small

Product Description

CRESSI 4MM DESERT MENS DRYSUIT

FEATURES:

Product Description

Product Description

Product Description

Product Description

Product Description

Product Description

Product Information

Materials - Suit Body: 4mm High-Density Pre-Compressed Neoprene Cuffs: Smooth 3.5mm Neoprene Inside Ultraspan On-Outside Collar: Smooth 2.5mm Neoprene Inside Ultraspan On-Outside

Inflator Valve - Yes

Pressure Relief Valve - Yes

Suspenders - Yes

LP Hose = 3/8" Threaded QD

Attached Boots - No, Socks

Pockets - One Thigh w/Zipper Closure & D-Ring

Closure - Metal Zipper

Hood - Yes

D-Rings - In-Pocket

Entry Type - Cross Shoulder Zipper

Product FAQs

Product Reviews

Materials - Suit Body: 4mm High-Density Pre-Compressed Neoprene
Cuffs: Smooth 3.5mm Neoprene Inside
Ultraspan On-Outside
Collar: Smooth 2.5mm Neoprene Inside
Ultraspan On-Outside