Need help?
1.800.999.3483 ⮟
|
STORE FINDER
Retail Locations
|
Brands |  Current Specials |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
Designed like a mountaineer's backpack, the Trans-Plate Harness disperses weight across the hips and back, minimizing shoulder strain.
The Dive Rite Trans-Plate Harness is a hybrid harness designed for divers who want the support of a backpack-style harness for better weight distribution, yet wish to dive with a hard metal backplate. When used with a 6 lbs. (2.73 kg) steel back-plate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and make easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
The harness's shoulder pads are constructed of 1000-denier ballistic nylon fabric for tear and abrasion resistance. 2" (50mm) nylon webbing rated at 7,000 lbs. (3,182 kg) breaking strength forms the shoulder straps and waist strap. Four 2" (50mm) D-rings on each shoulder strap are slightly bent for improved access, and placement can be adjusted. Note: size medium has only one 2" (50mm) D-ring per shoulder strap due to space limitations. Marine grade 316-stainless-steel hardware is used throughout, including: in addition to the (2) bent D-rings on each shoulder strap, there are (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
The shoulder straps feature pivot rings at chest-level for comfort, fit, and load distribution. Acetyl resin-engineered plastic "squeeze-style" quick-release buckles on shoulders for easy doffing and donning. 1" (25mm) nylon webbing rated at 2,200 lbs. (1,000 kg) breaking strength, and a Delrin 1" (25mm) squeeze-style quick-release buckle is used for a chest strap. Marine-grade stainless-steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Harness comes with an owner's manual, is available in multiple sizes, and weighs from 39 oz. to 48 oz. (1,106 to 1,361 g) Depending on size and is proudly made in the U.S.A.
| Product Category | BCD |
| SKU | DIR-T4000-XXXX |
| Condition | New |
| Brand | Dive Rite |
| Migration BCD | BP & Harness |
| More Info | SPECS:
|
At Divers Supply you can take advantage of our 60/120 day return policy. You may order just about anything, Inspect the equipment when it arrives, and if you're not fully satisfied you can return it for a full refund (less the shipping charge, for items which we offer free shipping the original shipping savings associated with the returned item(s) will be deducted), as long as you haven't used it. We won't even ask why you've changed your mind.
No restocking fee and no questions asked (provided it has not been used). Items returned within 60 days of date of invoice, will get full refund less S/H charges, Items returned between 60-120 days of date of invoice, will get a full store credit less S/H charges.
To return an item, just follow link below.
Return Merchandise Form
Questions about this item?
Ask us anything, or share you feedback. Our Staff is friendly and knowledgeable and always here to help! We are committed to earning your business with excellent service and prices. Divers Supply has been in business for over 40 years and is always working to give you the best SCUBA gear and equipment at the very lowest prices possible. So chat with one of our Experts and let us help get you into the best gear at the best price!
Sorry, we only have in stock for this item.
We updated your quantity to the maximum available.
So, you know what you want but you're on a budget? Or, you've found a lower price somewhere else? Don't worry, we have you covered.
Divers Supply is always working to give you the best SCUBA gear and equipment at the very lowest prices possible. With that, we guarantee to beat any authorized dealers price for the same product!
Another goal of Divers Supply is to fit all of the equipment you need inside your budget. We can not guarantee we can accomplish this, but we will always give it a shot!
Follow the steps below to submit your quote:
We want to make sure we've done everything possible to get you the products you need within your budget. If you found a lower price on an identical item, tell us where.
Add a note with any special requests, shipping instructions, or important product details.
.jpg)
