![]() |
Need help?
|
|
|||||||||
| |||||||||||
OceanReef Neptune III Package
Neptune III provides smooth breathing at any depth.
It extends field of vision considerably, removes impediment in lateral movement, features a double coated visor certified as a system to new EN250 standards.
The new 2nd Stage is now fully and easily detachable (only level 1 training required) for quick servicing, easy swapping.
The SAV with its new design, has a better grasping surface and an internal valve.
The mask will not fog when not connected to the cylinder and water will not drip in if forgotten open underwater.
Neptune III offers a new Visor geometry and new Orinasal pocket for minimal internal volume.
Less than Neptune Space
This orinasal pocket is the most anatomically designed on the market.
New pocket + new visor combine for minimal dead air space & minimal internal volume.
Less internal volume than competition.
Wider field of vision. New visor offers widest field of vision than any conventional mask, any Full Face Mask and is 20% wider than Neptune Space IDM.
| Product Category | Fullface & Communications |
| SKU | OCR-OR025405XXXX |
| Condition | New |
| Brand | Ocean Reef |
| Migration Fullface & Communications | Full Face Mask Accessories, Full Face Masks, Wireless Communications |
| More Info | TECH SPECS: MANUFACTURER - Ocean Reef Group MODEL / SYSTEM SKU - Neptune III System Package — SKU: OR0254 / OCR-OR0254 MASK TYPE - Integrated Full Face Mask (IDM) Category III PPE (EN 250:2014) VISOR / LENS - Scratch-Resistant Siloxane-Coated Polycarbonate (STANAG 4296 Impact Rated) 1ST STAGE INCLUDED - Ocean Reef SL35TX Balanced Diaphragm (Yoke or DIN 300 Bar options) PORTS & HOSES - 2 HP Ports, 4 LP Ports; includes LP Quick Disconnect Primary & Octopus Hoses COLD WATER RATING - Certified for water temperatures below 10°C (50°F) NITROX COMPATIBILITY - Up to 40% O ² factory-ready INCLUDED ACCESSORIES - SL35TX 1st Stage, Octopus, SPG, Quick-Disconnect Hose, Bump Backup Mask, Backpack SIZING OPTIONS - Small/Medium (S/M) & Medium/Large (M/L) Integrated 2nd Stage Vertical Regulator: Features a body-balanced vertical 2nd stage regulator that delivers smooth breathing at all depths and is CE cold-water certified. Natural Nose & Mouth Breathing: Internal oral-nasal pocket channels airflow dynamically across the double-coat siloxane resin visor, eliminating lens fogging and CO ² buildup. 3D Equalization System: Patented 3-way adjustable internal nose pads (up/down, wide/narrow, close/far) allow divers to seal their nostrils and equalize ears by simply pushing the mask slightly against their face. Surface Air Valve (SAV): Built-in ambient air breathing valve lets the diver breathe atmospheric air at the surface without depleting tank air or unstrapping the mask. Quick-Release Harness & Buckles: 6-strap head harness with rapid-rotating, quick-release buckles for fast donning and emergency single-handed doffing. SL35TX First Stage Regulator: High-performance balanced diaphragm first stage with a swivel turret, 2 HP ports, and 4 LP ports equipped with Quick Disconnect (QD) couplings. Complete System Ecosystem: Includes a dedicated secondary backup mask ("Bump Mask"), an octopus secondary regulator, pressure gauge, quick-disconnect hose assemblies, and a specialized 30-feature backpack carrying case. Operational Tips & Pro Tricks Adjust the 3D Equalizer Before Diving: Set the nose plugs in your dry room before the dive. Wear the mask, loosen the straps, and test if the rubber plugs block your nostrils comfortably when pushing the top frame slightly towards your face. Surface Air Valve Protocol: Always open the Surface Air Valve fully before entering the water to save tank air on the surface. Crucial: Close the SAV completely as part of your pre-submersion check; leaving it open will flood the mask upon descent. Donning Strategy: Tighten the straps in pairs from bottom to top (bottom straps first, then middle, then top). Over-tightening the top straps will pull the mask out of alignment with your brow line. Emergency Bail-Out Drills: Practice removing the Quick Disconnect hose coupling and switching to your backup "Bump" mask and traditional secondary octopus in a shallow pool before diving in open water. Post-Dive Care: Rinse the mask thoroughly with fresh water while keeping the Surface Air Valve open to clean the valve seat. Never press the regulator purge button while rinsing unless the first stage is pressurized on a tank. |