OMS BACKPLATE W/ SMARTSTREAM HARNESS SIG, CROTCH STRAP, BACK PAD W/ WEIGHT POCKETS, 6 LB SYSTEM, (1) UTILITYPOCKET AND SHOULDER PADS

SmartStream was developed to alleviate configuration challenges which may arise while donning a heavy rig. By pulling the waist straps forward the shoulder straps secure to the diver's shoulders and back - proper adjustments are instantly achieved. This uniquely adjustable OMS system allows the use of OMS weight pockets or a place to hold a canister light.

This updated harness uses 11.5 ft (3.5m) of 2" (5.1cm) nylon webbing materials and 316 stainless Steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily re-positioned for optimal configuration with an OMS SS buckle. A 2" (5.1) sewn crotch strap with a 2" (5.1 cm) DPV D-ring is also included.

BACKPLATE FEATURES:

• Superior De-Burring Process
• Design: Eliminates Sharp Edges, Prevents Abrasion & Cuts to Webbing and BC's
• Corrosion Resistant Aluminum Back Plate
• Weight: 5 lbs (2.3kg) SS / 1.75 lbs (794 g) AL
• Plate Webbing Slots: 1" and 2" (2.54cm and 5.1cm)
• Bottom Slot: Accommodate Band Bolts, Slightly Off 11" (27.94cm) On Center
• Slots to Mount Cam Bands for Single Cylinder Configuration
• Hard Coat Anodized Surface to Prevent Oxidation
• 22 Holes for Flexibility in Accessory Mounting
• Additional Slots to Mount Cam Bands for Single Cylinder Configuration

HARNESS FEATURES:

• Quality Diving Harness
• Superior Comfort
• 11 feet of OMS signature webbing
• 6 small EPDM bands
• 1 large rubber loop
• 2 inch Crotch Strap with “2” inch Scooter D-ring

* Tank bands are not included.

OMS BACKPLATE W/ SMARTSTREAM HARNESS SIG, CROTCH STRAP, BACK PAD W/ WEIGHT POCKETS, 6 LB SYSTEM, (1) UTILITYPOCKET AND SHOULDER PADS

SmartStream was developed to alleviate configuration challenges which may arise while donning a heavy rig. By pulling the waist straps forward the shoulder straps secure to the diver's shoulders and back - proper adjustments are instantly achieved. This uniquely adjustable OMS system allows the use of OMS weight pockets or a place to hold a canister light.

This updated harness uses 11.5 ft (3.5m) of 2" (5.1cm) nylon webbing materials and 316 stainless Steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily re-positioned for optimal configuration with an OMS SS buckle. A 2" (5.1) sewn crotch strap with a 2" (5.1 cm) DPV D-ring is also included.

BACKPLATE FEATURES:

• Superior De-Burring Process
• Design: Eliminates Sharp Edges, Prevents Abrasion & Cuts to Webbing and BC's
• Corrosion Resistant Aluminum Back Plate
• Weight: 5 lbs (2.3kg) SS / 1.75 lbs (794 g) AL
• Plate Webbing Slots: 1" and 2" (2.54cm and 5.1cm)
• Bottom Slot: Accommodate Band Bolts, Slightly Off 11" (27.94cm) On Center
• Slots to Mount Cam Bands for Single Cylinder Configuration
• Hard Coat Anodized Surface to Prevent Oxidation
• 22 Holes for Flexibility in Accessory Mounting
• Additional Slots to Mount Cam Bands for Single Cylinder Configuration

HARNESS FEATURES:

• Quality Diving Harness
• Superior Comfort
• 11 feet of OMS signature webbing
• 6 small EPDM bands
• 1 large rubber loop
• 2 inch Crotch Strap with “2” inch Scooter D-ring

* Tank bands are not included.