XS Scuba Miflex Lp Hose

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm

Extreme Abrasion Resistance

• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose

Lightweight and Flexible

• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie any MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

Manufacturing

• Made in Italy
• Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
• Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
• Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
• Certified and tested to EN250 Standard
• Fitting have 5.2 mm internal bore
• Hose diameter – External 12 mm, Internal 6.5mm