XS SCUBA SEABLAZER BCD

The SeaBlazer is a high-quality, weight-integrated, jacket-style BC.

By having the air cell wrap around the diver's torso, this BC will provide vertical orientation at the surface and excellent lift out of the water. The integrated Catch n' Release weight system is very easy to load, remains secure, and is easy to ditch. The neutral colors of the SeaBlazer allow the diver to accessorize with any color. Large utility pockets on either side have lowered #10 coiled zippers with dual zipper pulls for ease of entry. A scooped opening on the top, front of the right lobe is perfect for stowing and deploying an octopus. The octopus remains visible and secure throughout the dive. Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe.

The two-piece waistband is adjustable in the back to accommodate a wide range of waist sizes. The Micro Inflator uses a drift pin design, which provides greater reliability and longevity than those inflators relying upon standard Schrader valves. 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump, and a lower, rear pull dump. Inflator comes with a 3/8" threaded QD hose assembly. A clever two-piece backpack features a lowered tank band to better integrate with the BC's waist band. A tank positioning strap allows you to set your cylinder to the correct height every time. An integrated carrying handle is built into the backpack for easy lifting by a buddy when donning and doffing. Knife mounting grommets on the left side accommodate an XS Scuba BC knife. Accessory attachment is made easy with the 6 stainless steel D-rings that provide many attachment options.

The Catch n' Release weight system has a capacity of 20 lbs. (9 kg) of soft or block weights. Non-releasable trim weight pockets found on the back of the SeaBlazer increase the overall weight capacity as well as provide better positioning in the water. Trim pockets have a weight capacity of 10 lbs. (4.5 kg). The BCD's harness is fully adjustable with torso, waist, and chest (sternum) straps all equipped with squeeze-style side-release buckles for easy donning and doffing. The SeaBlazer has a lift capacity between 24 lbs. and 36 lbs. (10.9 kg to 16.33 kg) depending on the BCD's size. The SeaBlazer air cell is made from 420D solution-dyed nylon to resist fading. The harness is built from 600D Polytek fabric for fade and abrasion resistance. The SeaBlazer can accommodate XS Scuba's optional proprietary PLUS lighting system (see SKU: XSSBCRLCW). Small elastic loops that line the perimeter of the SeaBlazer BCD allow mounting of this unique lighting system. For SeaBlazer BCD with light system, see SKU: XSSSBBCL. BCD comes with an owner's manual.

FEATURES:

XS SCUBA SEABLAZER BCD

The SeaBlazer is a high-quality, weight-integrated, jacket-style BC.

By having the air cell wrap around the diver's torso, this BC will provide vertical orientation at the surface and excellent lift out of the water. The integrated Catch n' Release weight system is very easy to load, remains secure, and is easy to ditch. The neutral colors of the SeaBlazer allow the diver to accessorize with any color. Large utility pockets on either side have lowered #10 coiled zippers with dual zipper pulls for ease of entry. A scooped opening on the top, front of the right lobe is perfect for stowing and deploying an octopus. The octopus remains visible and secure throughout the dive. Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe.

The two-piece waistband is adjustable in the back to accommodate a wide range of waist sizes. The Micro Inflator uses a drift pin design, which provides greater reliability and longevity than those inflators relying upon standard Schrader valves. 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump, and a lower, rear pull dump. Inflator comes with a 3/8" threaded QD hose assembly. A clever two-piece backpack features a lowered tank band to better integrate with the BC's waist band. A tank positioning strap allows you to set your cylinder to the correct height every time. An integrated carrying handle is built into the backpack for easy lifting by a buddy when donning and doffing. Knife mounting grommets on the left side accommodate an XS Scuba BC knife. Accessory attachment is made easy with the 6 stainless steel D-rings that provide many attachment options.

The Catch n' Release weight system has a capacity of 20 lbs. (9 kg) of soft or block weights. Non-releasable trim weight pockets found on the back of the SeaBlazer increase the overall weight capacity as well as provide better positioning in the water. Trim pockets have a weight capacity of 10 lbs. (4.5 kg). The BCD's harness is fully adjustable with torso, waist, and chest (sternum) straps all equipped with squeeze-style side-release buckles for easy donning and doffing. The SeaBlazer has a lift capacity between 24 lbs. and 36 lbs. (10.9 kg to 16.33 kg) depending on the BCD's size. The SeaBlazer air cell is made from 420D solution-dyed nylon to resist fading. The harness is built from 600D Polytek fabric for fade and abrasion resistance. The SeaBlazer can accommodate XS Scuba's optional proprietary PLUS lighting system (see SKU: XSSBCRLCW). Small elastic loops that line the perimeter of the SeaBlazer BCD allow mounting of this unique lighting system. For SeaBlazer BCD with light system, see SKU: XSSSBBCL. BCD comes with an owner's manual.

FEATURES:

TO FIND YOUR PROPER SIZE, PLEASE SEE THE XS SCUBA BCD SIZING CHART BELOW

XS SCUBA SEABLAZER BCD

The SeaBlazer is a high-quality, weight-integrated, jacket-style BC.

By having the air cell wrap around the diver's torso, this BC will provide vertical orientation at the surface and excellent lift out of the water. The integrated Catch n' Release weight system is very easy to load, remains secure, and is easy to ditch. The neutral colors of the SeaBlazer allow the diver to accessorize with any color. Large utility pockets on either side have lowered #10 coiled zippers with dual zipper pulls for ease of entry. A scooped opening on the top, front of the right lobe is perfect for stowing and deploying an octopus. The octopus remains visible and secure throughout the dive. Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe.

The two-piece waistband is adjustable in the back to accommodate a wide range of waist sizes. The Micro Inflator uses a drift pin design, which provides greater reliability and longevity than those inflators relying upon standard Schrader valves. 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump, and a lower, rear pull dump. Inflator comes with a 3/8" threaded QD hose assembly. A clever two-piece backpack features a lowered tank band to better integrate with the BC's waist band. A tank positioning strap allows you to set your cylinder to the correct height every time. An integrated carrying handle is built into the backpack for easy lifting by a buddy when donning and doffing. Knife mounting grommets on the left side accommodate an XS Scuba BC knife. Accessory attachment is made easy with the 6 stainless steel D-rings that provide many attachment options.

The Catch n' Release weight system has a capacity of 20 lbs. (9 kg) of soft or block weights. Non-releasable trim weight pockets found on the back of the SeaBlazer increase the overall weight capacity as well as provide better positioning in the water. Trim pockets have a weight capacity of 10 lbs. (4.5 kg). The BCD's harness is fully adjustable with torso, waist, and chest (sternum) straps all equipped with squeeze-style side-release buckles for easy donning and doffing. The SeaBlazer has a lift capacity between 24 lbs. and 36 lbs. (10.9 kg to 16.33 kg) depending on the BCD's size. The SeaBlazer air cell is made from 420D solution-dyed nylon to resist fading. The harness is built from 600D Polytek fabric for fade and abrasion resistance. The SeaBlazer can accommodate XS Scuba's optional proprietary PLUS lighting system (see SKU: XSSBCRLCW). Small elastic loops that line the perimeter of the SeaBlazer BCD allow mounting of this unique lighting system. For SeaBlazer BCD with light system, see SKU: XSSSBBCL. BCD comes with an owner's manual.

FEATURES:

TO FIND YOUR PROPER SIZE, PLEASE SEE THE XS SCUBA BCD SIZING CHART BELOW

XS SCUBA SEABLAZER BCD

The SeaBlazer is a high-quality, weight-integrated, jacket-style BC.

By having the air cell wrap around the diver's torso, this BC will provide vertical orientation at the surface and excellent lift out of the water. The integrated Catch n' Release weight system is very easy to load, remains secure, and is easy to ditch. The neutral colors of the SeaBlazer allow the diver to accessorize with any color. Large utility pockets on either side have lowered #10 coiled zippers with dual zipper pulls for ease of entry. A scooped opening on the top, front of the right lobe is perfect for stowing and deploying an octopus. The octopus remains visible and secure throughout the dive. Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe.

The two-piece waistband is adjustable in the back to accommodate a wide range of waist sizes. The Micro Inflator uses a drift pin design, which provides greater reliability and longevity than those inflators relying upon standard Schrader valves. 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump, and a lower, rear pull dump. Inflator comes with a 3/8" threaded QD hose assembly. A clever two-piece backpack features a lowered tank band to better integrate with the BC's waist band. A tank positioning strap allows you to set your cylinder to the correct height every time. An integrated carrying handle is built into the backpack for easy lifting by a buddy when donning and doffing. Knife mounting grommets on the left side accommodate an XS Scuba BC knife. Accessory attachment is made easy with the 6 stainless steel D-rings that provide many attachment options.

The Catch n' Release weight system has a capacity of 20 lbs. (9 kg) of soft or block weights. Non-releasable trim weight pockets found on the back of the SeaBlazer increase the overall weight capacity as well as provide better positioning in the water. Trim pockets have a weight capacity of 10 lbs. (4.5 kg). The BCD's harness is fully adjustable with torso, waist, and chest (sternum) straps all equipped with squeeze-style side-release buckles for easy donning and doffing. The SeaBlazer has a lift capacity between 24 lbs. and 36 lbs. (10.9 kg to 16.33 kg) depending on the BCD's size. The SeaBlazer air cell is made from 420D solution-dyed nylon to resist fading. The harness is built from 600D Polytek fabric for fade and abrasion resistance. The SeaBlazer can accommodate XS Scuba's optional proprietary PLUS lighting system (see SKU: XSSBCRLCW). Small elastic loops that line the perimeter of the SeaBlazer BCD allow mounting of this unique lighting system. For SeaBlazer BCD with light system, see SKU: XSSSBBCL. BCD comes with an owner's manual.

FEATURES:

TO FIND YOUR PROPER SIZE, PLEASE SEE THE XS SCUBA BCD SIZING CHART BELOW

XS SCUBA SEABLAZER BCD

The SeaBlazer is a high-quality, weight-integrated, jacket-style BC.

By having the air cell wrap around the diver's torso, this BC will provide vertical orientation at the surface and excellent lift out of the water. The integrated Catch n' Release weight system is very easy to load, remains secure, and is easy to ditch. The neutral colors of the SeaBlazer allow the diver to accessorize with any color. Large utility pockets on either side have lowered #10 coiled zippers with dual zipper pulls for ease of entry. A scooped opening on the top, front of the right lobe is perfect for stowing and deploying an octopus. The octopus remains visible and secure throughout the dive. Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe.

The two-piece waistband is adjustable in the back to accommodate a wide range of waist sizes. The Micro Inflator uses a drift pin design, which provides greater reliability and longevity than those inflators relying upon standard Schrader valves. 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump, and a lower, rear pull dump. Inflator comes with a 3/8" threaded QD hose assembly. A clever two-piece backpack features a lowered tank band to better integrate with the BC's waist band. A tank positioning strap allows you to set your cylinder to the correct height every time. An integrated carrying handle is built into the backpack for easy lifting by a buddy when donning and doffing. Knife mounting grommets on the left side accommodate an XS Scuba BC knife. Accessory attachment is made easy with the 6 stainless steel D-rings that provide many attachment options.

The Catch n' Release weight system has a capacity of 20 lbs. (9 kg) of soft or block weights. Non-releasable trim weight pockets found on the back of the SeaBlazer increase the overall weight capacity as well as provide better positioning in the water. Trim pockets have a weight capacity of 10 lbs. (4.5 kg). The BCD's harness is fully adjustable with torso, waist, and chest (sternum) straps all equipped with squeeze-style side-release buckles for easy donning and doffing. The SeaBlazer has a lift capacity between 24 lbs. and 36 lbs. (10.9 kg to 16.33 kg) depending on the BCD's size. The SeaBlazer air cell is made from 420D solution-dyed nylon to resist fading. The harness is built from 600D Polytek fabric for fade and abrasion resistance. The SeaBlazer can accommodate XS Scuba's optional proprietary PLUS lighting system (see SKU: XSSBCRLCW). Small elastic loops that line the perimeter of the SeaBlazer BCD allow mounting of this unique lighting system. For SeaBlazer BCD with light system, see SKU: XSSSBBCL. BCD comes with an owner's manual.

FEATURES:

TO FIND YOUR PROPER SIZE, PLEASE SEE THE XS SCUBA BCD SIZING CHART BELOW

XS SCUBA SEABLAZER BCD

The SeaBlazer is a high-quality, weight-integrated, jacket-style BC.

By having the air cell wrap around the diver's torso, this BC will provide vertical orientation at the surface and excellent lift out of the water. The integrated Catch n' Release weight system is very easy to load, remains secure, and is easy to ditch. The neutral colors of the SeaBlazer allow the diver to accessorize with any color. Large utility pockets on either side have lowered #10 coiled zippers with dual zipper pulls for ease of entry. A scooped opening on the top, front of the right lobe is perfect for stowing and deploying an octopus. The octopus remains visible and secure throughout the dive. Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe.

The two-piece waistband is adjustable in the back to accommodate a wide range of waist sizes. The Micro Inflator uses a drift pin design, which provides greater reliability and longevity than those inflators relying upon standard Schrader valves. 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump, and a lower, rear pull dump. Inflator comes with a 3/8" threaded QD hose assembly. A clever two-piece backpack features a lowered tank band to better integrate with the BC's waist band. A tank positioning strap allows you to set your cylinder to the correct height every time. An integrated carrying handle is built into the backpack for easy lifting by a buddy when donning and doffing. Knife mounting grommets on the left side accommodate an XS Scuba BC knife. Accessory attachment is made easy with the 6 stainless steel D-rings that provide many attachment options.

The Catch n' Release weight system has a capacity of 20 lbs. (9 kg) of soft or block weights. Non-releasable trim weight pockets found on the back of the SeaBlazer increase the overall weight capacity as well as provide better positioning in the water. Trim pockets have a weight capacity of 10 lbs. (4.5 kg). The BCD's harness is fully adjustable with torso, waist, and chest (sternum) straps all equipped with squeeze-style side-release buckles for easy donning and doffing. The SeaBlazer has a lift capacity between 24 lbs. and 36 lbs. (10.9 kg to 16.33 kg) depending on the BCD's size. The SeaBlazer air cell is made from 420D solution-dyed nylon to resist fading. The harness is built from 600D Polytek fabric for fade and abrasion resistance. The SeaBlazer can accommodate XS Scuba's optional proprietary PLUS lighting system (see SKU: XSSBCRLCW). Small elastic loops that line the perimeter of the SeaBlazer BCD allow mounting of this unique lighting system. For SeaBlazer BCD with light system, see SKU: XSSSBBCL. BCD comes with an owner's manual.

FEATURES:

• Catch n’ Release™ weight system for the easiest loading weight pockets
• Secure your weights with visual, audible, and tactile confirmation
• Single-pull release for safety
• Large utility pockets on either side have lowered zippers with large pull tabs for easy access
• Non-ditchable trim weight pockets found on the back of the SeaBlazer (except size XS) increase the overall weight capacity as well as provide better positioning in the water. They are secured with hook-and-loop flaps and side-release clips
• Swivel shoulder buckles allow the SeaBlazer to move with you while providing an optimal fit
• Enlarged thumb loops allow ease of adjustment while wearing thick gloves
• The two-piece waistband is adjustable in the back to accommodate a wide range of waist sizes
• The tank band features a stainless steel cam buckle with external adjustment
• Comes with XS Scuba’s Micro Inflator, but a MultiMax breathable inflator option is available
• A scooped opening on the top, front of the right lobe is perfect for stowing and deploying an octopus. The octopus remains visible and secure throughout the dive
• Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe
• A tank positioning strap allows you to set your cylinder to the correct height every time
• An integrated carrying handle is built into the backpack
• 6 stainless steel D-rings provide many attachment options
• 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump, and a lower, rear pull dump
• Knife mounting grommets on the left side accommodate an XS Scuba BC knife
• The SeaBlazer BC comes in 5 sizes

• SeaBlazer BC Lift Values (lbs/N) XS - 24/100                                                                                                                                                                                                                                                                                                                         SM - 27/120                                                                                                                                                                                                                                                                                                                       MD - 30/130
                                                               LG - 40/170                                                                                                                                                                                                                                                                                                                         XL - 46/200