![]() |
Need help?
|
|
|||||||||
| |||||||||||
The Inflator Adapter (Scubapro Female to Standard Male) is a specialized quick-disconnect (QD) scuba adapter designed to connect a oversized Scubapro AIR2 style low-pressure inflator hose to a standard BCD inflator nipple.
By converting a high-flow Scubapro AIR2 quick-disconnect coupling into a standard male BCD post, this adapter enables divers and dive service technicians to use a Scubapro AIR2 dedicated hose with standard BCD inflators, surface signal buoys, or gear bench testing equipment without changing out the hose.
Does your dive regulator have a large Scubapro Air ll or TUSA Duo-Air Breathable Inflator Hose? If so you know that a standard inflator hose will not work with it. If you travel to exotic locations for diving you might not be able to acquire a large fitting replacement hose for your breathable inflator device, rendering your BCD inoperable. This adapter will allow you to use your breathable inflator with BCD on a standard inflator hose.
Just plug this adapter into the end of a standard inflator hose and your Scuba Pro Air ll or TUSA Duo-Air (see SKU's: SCPA2GYR, TBTIR3 and TBTSS02) will function as an Inflator and will provide minimal air flow for breathing. Note: The smaller valve design of a standard BCD inflator hose cannot deliver the required volume of air-flow required to properly supply the breathable inflator in an out-of-air situation. Breathable are will be delivered to the breathable inflator but will be at a much lower volume due the smaller orifice of the standard inflator hose. Adapter is made from durable chrome plated brass for strength and long service life. The Adapter makes a great save-a-dive-kit item. Adapter is easy to install and is intended for low pressure use only below 200 psi (13.8 bars).
Hose Conversion: Connects a female Scubapro AIR2 quick-disconnect hose coupling directly to a standard BC inflator male post.
Corrosion-Resistant Build: Constructed from heavy-duty, chrome-plated marine brass designed to withstand harsh saltwater conditions.
Service Tech Essential: Highly recommended for dive technician service benches to test and flow-check standard inflators using an AIR2 hose setup.
Save-a-Dive Accessory: Ideal gear bag adapter when switching between different buoyancy compensators or rental setups while keeping a Scubapro AIR2 low-pressure hose installed on your regulator first stage.
Note: Because standard inflator nipples have a narrower internal bore than an AIR2 connection, using this adapter on an AIR2 hose will restrict airflow relative to a native AIR2 fitting. It is primarily intended for standard BCD inflation or bench testing rather than supplying an emergency backup regulator (AIR2) alternate air source.
| Product Category | Accessories |
| SKU | APL-2871 |
| Condition | New |
| Brand | A-Plus |
| More Info | TECH SPECS:
Note: Because standard inflator nipples have a narrower internal bore than an AIR2 connection, using this adapter on an AIR2 hose will restrict airflow relative to a native AIR2 fitting. It is primarily intended for standard BCD inflation or bench testing rather than supplying an emergency backup regulator (AIR2) alternate air source. |