INTERSPIRO DIVATOR FULL FACE MASK NORMAL PRESSURE BV WITH HATCH GRAY NAT. RUBBER

It will perform even in the most extreme of conditions: mud, oil, and fast-flowing cold currents do not have a serious impact on the performance.

The Divator breathing valve is one of the best-tested breathing valves available. The breathing valve is balanced and maintains extremely low breathing resistance at all diving depths, even if variations occur in the secondary pressure. The combination of high air flow capacity and low breathing resistance increases the diver's performance and endurance.
In the inhalation channel, there is a one-way valve to prevent water from penetrating the valve mechanism, where it could freeze and cause the valve to stick in the open position. Whether you're diving in murky waters or need clear communication, this mask ensures top-notch performance.

The low-volume visor reduces the positive buoyancy generated from air inside the mask, and the inner mask design minimizes “dead space” and re-inhalation of CO2.
It is easy to drain water by using the purge button on the breathing valve.
The mask is equipped with retainers for spectacle inserts, and it is prepared for underwater communication. The communication capabilities are enhanced by the airflow design that considerably reduces turbulence noise.

The rubber head harness has five straps that are tightened and locked by stainless steel buckles. The wide and soft sealing edge of the mask is pressed lightly against the face and follows the contours of the face, giving an effective seal.

The Divator breathing valve is available with safety pressure or with normal pressure. The safety pressure is turned on automatically when the user takes their first breath in the mask. The safety pressure reduces the risk of inward leakage of water (or air at the surface) and is very important when diving in contaminated water. The safety pressure in the mask is maintained regardless of the diver's air consumption rate.

The face mask is available in Silicone or Natural rubber with color options black, yellow, and grey as defined below. Divator Hatch can be added as a variant option.

FEATURES:

TO SEE AND READ ALL FEATURES AND SPECS, PLEASE CLICK ON THE MORE INFORMATION TAB TO THE LEFT

INTERSPIRO DIVATOR FULL FACE MASK NORMAL PRESSURE BV WITH HATCH YELLOW SILICONE

It will perform even in the most extreme of conditions: mud, oil, and fast-flowing cold currents do not have a serious impact on the performance.

The Divator breathing valve is one of the best-tested breathing valves available. The breathing valve is balanced and maintains extremely low breathing resistance at all diving depths, even if variations occur in the secondary pressure. The combination of high air flow capacity and low breathing resistance increases the diver's performance and endurance.
In the inhalation channel, there is a one-way valve to prevent water from penetrating the valve mechanism, where it could freeze and cause the valve to stick in the open position. Whether you're diving in murky waters or need clear communication, this mask ensures top-notch performance.

The low-volume visor reduces the positive buoyancy generated from air inside the mask, and the inner mask design minimizes “dead space” and re-inhalation of CO2.
It is easy to drain water by using the purge button on the breathing valve.
The mask is equipped with retainers for spectacle inserts, and it is prepared for underwater communication. The communication capabilities are enhanced by the airflow design that considerably reduces turbulence noise.

The rubber head harness has five straps that are tightened and locked by stainless steel buckles. The wide and soft sealing edge of the mask is pressed lightly against the face and follows the contours of the face, giving an effective seal.

The Divator breathing valve is available with safety pressure or with normal pressure. The safety pressure is turned on automatically when the user takes their first breath in the mask. The safety pressure reduces the risk of inward leakage of water (or air at the surface) and is very important when diving in contaminated water. The safety pressure in the mask is maintained regardless of the diver's air consumption rate.

The face mask is available in Silicone or Natural rubber with color options black, yellow, and grey as defined below. Divator Hatch can be added as a variant option.

FEATURES:

TO SEE AND READ ALL FEATURES AND SPECS, PLEASE CLICK ON THE MORE INFORMATION TAB TO THE LEFT

INTERSPIRO DIVATOR FULL FACE MASK NORMAL PRESSURE BV WITH HATCH BLACK SILICONE

It will perform even in the most extreme of conditions: mud, oil, and fast-flowing cold currents do not have a serious impact on the performance.

The Divator breathing valve is one of the best-tested breathing valves available. The breathing valve is balanced and maintains extremely low breathing resistance at all diving depths, even if variations occur in the secondary pressure. The combination of high air flow capacity and low breathing resistance increases the diver's performance and endurance.
In the inhalation channel, there is a one-way valve to prevent water from penetrating the valve mechanism, where it could freeze and cause the valve to stick in the open position. Whether you're diving in murky waters or need clear communication, this mask ensures top-notch performance.

The low-volume visor reduces the positive buoyancy generated from air inside the mask, and the inner mask design minimizes “dead space” and re-inhalation of CO2.
It is easy to drain water by using the purge button on the breathing valve.
The mask is equipped with retainers for spectacle inserts, and it is prepared for underwater communication. The communication capabilities are enhanced by the airflow design that considerably reduces turbulence noise.

The rubber head harness has five straps that are tightened and locked by stainless steel buckles. The wide and soft sealing edge of the mask is pressed lightly against the face and follows the contours of the face, giving an effective seal.

The Divator breathing valve is available with safety pressure or with normal pressure. The safety pressure is turned on automatically when the user takes their first breath in the mask. The safety pressure reduces the risk of inward leakage of water (or air at the surface) and is very important when diving in contaminated water. The safety pressure in the mask is maintained regardless of the diver's air consumption rate.

The face mask is available in Silicone or Natural rubber with color options black, yellow, and grey as defined below. Divator Hatch can be added as a variant option.

FEATURES:

TO SEE AND READ ALL FEATURES AND SPECS, PLEASE CLICK ON THE MORE INFORMATION TAB TO THE LEFT

Divator Full Face Mask w/ Normal Pressure Breathing Valve and Hatch

It will perform even in the most extreme of conditions: mud, oil, and fast-flowing cold currents do not have a serious impact on the performance.

The Divator breathing valve is one of the best-tested breathing valves available. The breathing valve is balanced and maintains extremely low breathing resistance at all diving depths, even if variations occur in the secondary pressure. The combination of high air flow capacity and low breathing resistance increases the diver's performance and endurance.
In the inhalation channel, there is a one-way valve to prevent water from penetrating the valve mechanism, where it could freeze and cause the valve to stick in the open position. Whether you're diving in murky waters or need clear communication, this mask ensures top-notch performance.

The low-volume visor reduces the positive buoyancy generated from air inside the mask, and the inner mask design minimizes “dead space” and re-inhalation of CO2.
It is easy to drain water by using the purge button on the breathing valve.
The mask is equipped with retainers for spectacle inserts, and it is prepared for underwater communication. The communication capabilities are enhanced by the airflow design that considerably reduces turbulence noise.

The rubber head harness has five straps that are tightened and locked by stainless steel buckles. The wide and soft sealing edge of the mask is pressed lightly against the face and follows the contours of the face, giving an effective seal.

The Divator breathing valve is available with safety pressure or with normal pressure. The safety pressure is turned on automatically when the user takes their first breath in the mask. The safety pressure reduces the risk of inward leakage of water (or air at the surface) and is very important when diving in contaminated water. The safety pressure in the mask is maintained regardless of the diver's air consumption rate.

The face mask is available in Silicone or Natural rubber with color options black, yellow, and grey as defined below. Divator Hatch can be added as a variant option.

FEATURES:

TO SEE AND READ ALL FEATURES AND SPECS, PLEASE CLICK ON THE MORE INFORMATION TAB TO THE LEFT

Divator Full Face Mask w/ Normal Pressure Breathing Valve and Hatch

It will perform even in the most extreme of conditions: mud, oil, and fast-flowing cold currents do not have a serious impact on the performance.

The Divator breathing valve is one of the best-tested breathing valves available. The breathing valve is balanced and maintains extremely low breathing resistance at all diving depths, even if variations occur in the secondary pressure. The combination of high air flow capacity and low breathing resistance increases the diver's performance and endurance.
In the inhalation channel, there is a one-way valve to prevent water from penetrating the valve mechanism, where it could freeze and cause the valve to stick in the open position. Whether you're diving in murky waters or need clear communication, this mask ensures top-notch performance.

The low-volume visor reduces the positive buoyancy generated from air inside the mask, and the inner mask design minimizes “dead space” and re-inhalation of CO2.
It is easy to drain water by using the purge button on the breathing valve.
The mask is equipped with retainers for spectacle inserts, and it is prepared for underwater communication. The communication capabilities are enhanced by the airflow design that considerably reduces turbulence noise.

The rubber head harness has five straps that are tightened and locked by stainless steel buckles. The wide and soft sealing edge of the mask is pressed lightly against the face and follows the contours of the face, giving an effective seal.

The Divator breathing valve is available with safety pressure or with normal pressure. The safety pressure is turned on automatically when the user takes their first breath in the mask. The safety pressure reduces the risk of inward leakage of water (or air at the surface) and is very important when diving in contaminated water. The safety pressure in the mask is maintained regardless of the diver's air consumption rate.

The face mask is available in Silicone or Natural rubber with color options black, yellow, and grey as defined below. Divator Hatch can be added as a variant option.

FEATURES:

• Enjoy superior underwater visibility with this full-face scuba mask's clear lens.
• Experience a comfortable, secure seal with the Divator's silicone skirt, dive after dive.
• Built for durability, the Interspiro full-face mask withstands the rigors of scuba diving.
• Communicate easily underwater; optional comms can be attached to this versatile scuba diving mask.
• Equalize pressure effortlessly with the hands-free design of this full face dive mask.
• Explore confidently; this full-face scuba mask offers top-notch cold water performance.
• Silicone full face mask offers durability and a comfortable fit
• Retainers for spectacle inserts are ideal for divers who wear glasses
• Communication-ready with an airflow design that reduces turbulence noise
• Five-strap harness with stainless steel buckles ensures a secure fit
• Wide, soft silicone sealing edge ensures a watertight, comfortable seal
• Low-volume visor reduces buoyancy for improved underwater stability
• Divator Hatch option available for added flexibility and protection
• Available in black or yellow silicone for professional use
• High-performance design, built to endure extreme underwater conditions
• Suitable for both recreational and professional divers