Dive Rite Slide Lock 2 Series Reel

Product Description

Dive Rite Slide Lock 2 Series

Dive Rite’s Slide Lock 2 features the tight tolerances and innovative features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels. Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment. By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
The versatile 200-foot (60 m) size is ideal for many applications, including as a cave primary or cave safety, wreck diving, or shooting lift bags and markers.
The 400-foot (120 m) size is standard for use as a primary cave reel and is perfect for the extended exploration of any underwater environment. Comes with a stainless steel double bolt snap.

Key Features:

Proudly made in the USA.
Frame: Single-piece, machined acetal.
Spool: Machined acetal with knurled center core and line lock holes.
Hardware: Marine-grade, passivated 316 stainless steel.
Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
“Fuel gauge” slot on spool shows line remaining.
200 ft (60 m) of braided, #24 line in white or hi-viz orange.
400 ft (120 m) of braided, #24 line in white or hi-viz orange.

Product Description

Dive Rite Slide Lock 2 Series 200' Reel #24 Orange Line

Dive Rite’s Slide Lock 2 features the tight tolerances and innovative features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels. Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment. By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
The versatile 200-foot (60 m) size is ideal for many applications, including as a cave primary or cave safety, wreck diving, or shooting lift bags and markers.
The 400-foot (120 m) size is standard for use as a primary cave reel and is perfect for the extended exploration of any underwater environment. Comes with a stainless steel double bolt snap.

Key Features:

Proudly made in the USA.
Frame: Single-piece, machined acetal.
Spool: Machined acetal with knurled center core and line lock holes.
Hardware: Marine-grade, passivated 316 stainless steel.
Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
“Fuel gauge” slot on spool shows line remaining.
200 ft (60 m) of braided, #24 line in white or hi-viz orange.
400 ft (120 m) of braided, #24 line in white or hi-viz orange.

Product Description

Dive Rite Slide Lock 2 Series 400' Reel #24 Orange Line

Dive Rite’s Slide Lock 2 features the tight tolerances and innovative features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels. Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment. By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
The versatile 200-foot (60 m) size is ideal for many applications, including as a cave primary or cave safety, wreck diving, or shooting lift bags and markers.
The 400-foot (120 m) size is standard for use as a primary cave reel and is perfect for the extended exploration of any underwater environment. Comes with a stainless steel double bolt snap.

Key Features:

Proudly made in the USA.
Frame: Single-piece, machined acetal.
Spool: Machined acetal with knurled center core and line lock holes.
Hardware: Marine-grade, passivated 316 stainless steel.
Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
“Fuel gauge” slot on spool shows line remaining.
200 ft (60 m) of braided, #24 line in white or hi-viz orange.
400 ft (120 m) of braided, #24 line in white or hi-viz orange.

Product Description

Dive Rite Slide Lock 2 Series 200' Reel #24 White Line

Dive Rite’s Slide Lock 2 features the tight tolerances and innovative features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels. Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment. By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
The versatile 200-foot (60 m) size is ideal for many applications, including as a cave primary or cave safety, wreck diving, or shooting lift bags and markers.
The 400-foot (120 m) size is standard for use as a primary cave reel and is perfect for the extended exploration of any underwater environment. Comes with a stainless steel double bolt snap.

Key Features:

Proudly made in the USA.
Frame: Single-piece, machined acetal.
Spool: Machined acetal with knurled center core and line lock holes.
Hardware: Marine-grade, passivated 316 stainless steel.
Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
“Fuel gauge” slot on spool shows line remaining.
200 ft (60 m) of braided, #24 line in white or hi-viz orange.
400 ft (120 m) of braided, #24 line in white or hi-viz orange.

Product Description

Dive Rite Slide Lock 2 Series 400' Reel #24 White Line

Dive Rite’s Slide Lock 2 features the tight tolerances and innovative features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels. Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment. By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
The versatile 200-foot (60 m) size is ideal for many applications, including as a cave primary or cave safety, wreck diving, or shooting lift bags and markers.
The 400-foot (120 m) size is standard for use as a primary cave reel and is perfect for the extended exploration of any underwater environment. Comes with a stainless steel double bolt snap.

Key Features:

Proudly made in the USA.
Frame: Single-piece, machined acetal.
Spool: Machined acetal with knurled center core and line lock holes.
Hardware: Marine-grade, passivated 316 stainless steel.
Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
“Fuel gauge” slot on spool shows line remaining.
200 ft (60 m) of braided, #24 line in white or hi-viz orange.
400 ft (120 m) of braided, #24 line in white or hi-viz orange.

Product Category	Accessories
SKU	DIR-RE8XX00
Condition	New
Brand

Dive Rite Slide Lock 2 Series Reel

Dive Rite Slide Lock 2 Series 200' Reel #24 Orange Line

Dive Rite Slide Lock 2 Series 400' Reel #24 Orange Line

Dive Rite Slide Lock 2 Series 200' Reel #24 White Line

Dive Rite Slide Lock 2 Series 400' Reel #24 White Line

Sharks Heavy Duty Pony Tank Bracket 13/40 cf

Mares Universal Hanger

OrcaTorch 26650 battery (5000mah)

Flex Harness Assembly

Ratio Replacement Oxygen Analyser Sensor

TUSA Apa Mounting Strap

Product Description

Dive Rite Slide Lock 2 Series

Key Features:

Product Description

Dive Rite Slide Lock 2 Series 200' Reel #24 Orange Line

Key Features:

Product Description

Dive Rite Slide Lock 2 Series 400' Reel #24 Orange Line

Key Features:

Product Description

Dive Rite Slide Lock 2 Series 200' Reel #24 White Line

Key Features:

Product Description

Dive Rite Slide Lock 2 Series 400' Reel #24 White Line

Key Features:

Product Information

Product FAQs

Product Reviews