Includes: Blue Steel PRO Valve, Tank, Current Hydro, VIP and Tank boot
Triple-protected the finish for long-lasting durability. The process includes a zinc galvanization spray followed by epoxy paint and then a polyurethane topcoat.
|Stated Volume||80 cu ft||100 cu ft||120 cu ft||117 cu ft||133 cu ft|
|True Capacity||81.7 cu ft / 10.2 liters||101.3 cu ft / 12.9 liters||120.1 cu ft / 15.3 liters||117.8 cu ft / 15 liters||133.5 cu ft / 17 liters|
|Service Pressure||3442 psi / 237 bar||3442 psi / 237 bar||3442 psi / 237 bar||3442 psi / 237 bar||3442 psi / 237 bar|
|**Buoyancy Full||- 8.05 lbs / -3.65 kg||- 8.41 lbs / -3.81 kg||- 8.82 lbs / -4.13 kg||- 9.12 lbs / -4.13 kg||- 9.08 lbs / 0.66 kg|
|**Buoyancy Empty||- 1.74 lbs / -0.79||-0.59 lbs / -0.15||0.65 lbs / 0.29||0.35 lbs / 0.16||1.45 lbs / 0.66|
|Weight Empty||28.3 lbs / 13.0 kg||34.0 lbs / 15.6 kg||39.2 lbs / 17.8 kg||37.6 lbs / 17.7 kg||42.4 lbs / 19.4 kg|
|Outside Diameter||7.25” / 184 mm||7.25” / 184 mm||7.25” / 184 mm||8.00” / 203 mm||8.00” / 203 mm|
|Length||20.8” / 53.0 cm||25.3” / 64.5 cm||29.1” / 74.5 cm||24.2” / 61.5 cm||26.85” / 68.0 cm|
|REE||68 cc||86 cc||100 cc||100 cc||113 cc|
|HYDRO DATES ON NEW FABER STEEL CYLINDERS||OXYGEN USE WITH FABER STEEL CYLINDERS|
We ship cylinders with the “freshest” possible hydro date. We are limited in some models because of high manufacturing quantities and relatively low sales volume. Please understand, that steel cylinders shipped to your location within 18 months from the date of manufacture are considered “current hydro” and not subject to further discounts.
Faber steel cylinders are cleaned at the factory for oxygen-enriched service up to 40% pre-blended nitrox. If you intend to use this cylinder for oxygen-enriched service, it is the responsibility of the cylinder user to ensure that the cylinder and all components are maintained in a proper state of oxygen cleanliness in strict accordance with regulatory requirements and industry standards.