Hollis DT 45 Dual Wing (45lbs)

HOLLIS DT45 DUAL WING

The DT45 Dual Wing features a consistent 360-degree floatation for lighter aluminum cylinders with a redundant air cell.

The target audience for the DT45 dual is warm water, banded aluminum cylinders in a wetsuit, where backup inflation is mandatory

The Hollis DT line of wings is another brand-new series designed for double cylinders. The DT50 features a 360 Degree tapered profile for heavier cylinders, to increase lift towards the hips, promoting better horizontal trim in dive position while still allowing perfect surface floatation. While the DT45 Dual features a more consistent 360 Degree floatation for lighter aluminum cylinders with a redundant air cell. The target audience for the DT45 dual is warm water, banded aluminum cylinders in a wetsuit, where backup inflation is mandatory. While the DT50 is focused on the dedicated dry suit diver, with heavier cylinders in cold water.

Tank slots are included on both models, which allows the occasional single-tank dive without the need for a single-tank adapter plate. This reduces weight and unnecessary accessories while traveling. The bladder is a two-piece design, with a rugged 1680 Cordura nylon outer shell to prevent abrasion and punctures, and a 420-denier nylon internally urethane laminated with radio frequency (RF) welded seam inner bladder to maintain the buoyancy. The lower OPV (single DT50 & dual DT45) are easy to reach for venting gas while horizontal or heads down, and the inflator design is a K style with a rugged crushproof rubber hose for easy positioning and oral inflation should you need to. Both DT wings come standard with 3/8" threaded quick disconnect inflator hose(s). Welded flange and one-piece retainer for servicing without the need for tools. Central elbow to avoid tank valve/regulator interference.

Both DT wings come standard with 3/8" threaded quick disconnect inflator hose(s). Welded flange and one-piece retainer for servicing without the need for tools. Central elbow to avoid tank valve/regulator interference. The DT45 provides 45 lbs. (20 kg) of lift capacity, and the DT50 provides 50 lbs. (23 kg) of lift capacity.

FEATURES:

DT Wing: Designed for Double Cylinders
                  Available in Multiple Lift Capacities
                  Rugged 1680 Cordura Nylon Outer Shell
Shell: Prevent Abrasion & Punctures
Bladder: 420-Denier Nylon
                 Internally Urethane Laminated
                 Radio Frequency (RF) Welded Seams
                 Lower OPV (single DT50 & dual DT45)
OPVs: Easy to Reach for Venting Gas while Horizontal or Heads Down
Hollis Power Inflator System: Durable Impact Resistant Plastic w/Corrugated Rubber Hose
                                                         Internal Components & Inlet Quick-Disconnect Nipple:
                                                         Corrosion-Resistant Chrome-Plated Brass
3/8" Threaded Low-Pressure QD Hose(s)
Tank Slots: Allows Occasional Single Tank Dive w/o Need for Single Tank Adapter
                     Reduces Weight & Unnecessary Accessories In-Traveling
                     Central Elbow to Avoid Tank Valve/Regulator Interference
                     Welded Flange & 1-Piece Retainer for Servicing w/o Need for Tools
DT45 Dual: Lift Capacity: 45 lbs. (20 kg)
                                               More Consistent 360 Degree Floatation
                                               For Lighter Aluminum Cylinders w/Redundant Air Cell
Target Audience: Warm Water, Banded Aluminum Cylinders In-Wetsuit
Where Backup Inflation Is-Mandatory
DT50: Lift Capacity: 50 lbs. (23 kg)
                                     360 Degree Tapered Profile for Heavier Cylinders
                                     Increase Lift Towards Hips
Promotes Better Horizontal Trim In-Dive-Position
Allows Perfect Surface Floatation
Target Audience: Dedicated Dry Suit Diver, w/Heavier Cylinders In-Cold-Water

Experience superior buoyancy control with this Hollis BCD, designed for technical diving.
Achieve optimal streamlining underwater using this back-inflator wing for reduced drag.
Enjoy exceptional durability with the 1680 Cordura Nylon outer shell of this tech BCD.
Customize your fit with the adjustable Hollis BCD, ensuring comfort during long dives.
Benefit from the robust lift capacity, supporting you and your gear effortlessly.
Trust in the integrated weight system for balanced and stable underwater excursions.
What's in the Box: DT Wing
                                    Low Pressure Hose(s)
                                    MFG 5 Year Limited Warranty