Need help?
1.800.999.3483 ⮟
|
STORE FINDER
Retail Locations
|
Brands |  Current Specials |
|
Need help?
|
|
|||||||||
| |||||||||||
|
 |
 |
 |
 |
ScubaPro Hydros Pro2 Monorail Multi Mount - Product will be backordered until May 2026
Ideal for divers seeking more flexibility without adding bulk, the monorail scuba mounting plates support a wide range of essential gear and tools!
Flexible Mounting for Essential Dive Gear
The Monorail Multi-Mount Accessory Plate Set offers an effective way to expand gear setup on the Hydros Pro 2 BCD. Designed to mount on either or both sides, this BCD plate kit allows divers to attach accessories above or below the Monorail and weight pockets, depending on configuration needs. Whether you dive with a knife, light, SMB, or Hydros Ninja Pocket, this accessory plate set provides a reliable, organized solution for modular gear placement.
Compatible Design with Easy Installation
This Hydros Pro 2 compatible accessory integrates smoothly with the BCD's existing Monorail system. The set includes 2 plastic plates and 2 stainless steel screws, providing secure and stable attachment to the Hydros Pro 2 Monorail system. Divers can personalize gear placement with the ability to mount the plates to the left, right, or both sides, adapting to different dive profiles or equipment preferences without complications.
Practical Upgrade for Customization
Ideal for divers seeking more flexibility without adding bulk, the monorail scuba mounting plates support a wide range of essential gear and tools. Whether for streamlining your dive setup or expanding your BCD's utility, this plate set is a practical upgrade that complements the Hydros Pro 2 modular design. Its simple, secure design allows for quick setup and consistent placement of key items, dive after dive.
Secure Attachment
Plates securely attach behind the Monorail
Customize Your BCD with Accessories
Great for attaching knives, SMBs, lights, Hydros Ninja Pockets, and more
Included Components
Comes with 2 plastic plates and 2 stainless steel screws
Compatibility
Compatible with the Hydros Pro 2
| Product Category | Accessories |
| SKU | SCU-21.798.005 |
| Condition | New |
| Brand | ScubaPro |
| More Info | SPECS:
|
Thank you for your inquiry and question about this product. If you are just sliding it into the Monorail track, you are actually only halfway there! That small lip or groove is designed to align and position the plate, but it isn't meant to hold it in place against the tugs and pulls of diving. What actually secures the accessory mount plate to the Hydros Pro 2 is a stainless steel screw. Here is how the setup works to lock it down tightly:
1. The Monorail Track Alignment. The plate hooks or slides behind the Monorail matrix system on the BCD. This locks the plastic backing plate horizontally and vertically so it can't twist or slide around freely.
2. The Locking ScrewIf you look at the center or end of the mounting plate, there is a designated screw hole. The accessory kit comes packaged with stainless steel screws (usually one per plate). You line up the hole on the plate with the corresponding matrix hole on the BCD's Monorail. You thread the stainless steel screw through from the front/accessory side to anchor it directly into the BCD frame.
3. Mounting the Gear (Knives, Pockets, etc.)If you are mounting an accessory like a Scubapro Mako knife sheath or a Ninja Pocket, the screws often pass through both the accessory and the mounting plate, threading firmly into the BCD back-anchors.
Pro-Tip: Because these screws are going into a plastic matrix and will be subjected to salt water, tighten them until they are snug, but do not overtighten them, as you can strip the plastic threading. A lot of divers like to check that these screws are tight during their pre-dive gear check, as vibrations during travel can sometimes wiggle them loose over time.
Hope this helps you. We strive to give the best product, prices, and service to our customers. Let us know if you ever need anything. We are happy to help.
