![]() |
Need help?
|
|
|||||||||
| |||||||||||
The SCUBAPRO Standard Pressure Gauge (Base SKUs: 05.011.112 [Bar] & 05.011.122 [PSI]) is a classic, full-sized analog submersible pressure gauge (SPG) shipped complete with a high-pressure hose and heavy-duty protective rubber boot.
Built as an industry-standard monitoring instrument for recreational divers, rental fleets, and training institutions, it delivers precise cylinder pressure readouts across all temperature conditions.
The Standard SPG features a larger face diameter than the compact U-Line series, offering maximum dial legibility at a glance.
Housed inside a heavy-duty chrome-plated brass casing, the interior copper-beryllium Bourdon tube provides accurate pressure measurement even at extreme depths.
Wrapped in a shock-absorbing elastomeric boot with an integrated lanyard attachment loop, this gauge is engineered to withstand daily wear on dive boats and rental racks.
This traditional standard-sized pressure gauge with a plastic case is mounted in a shock-proof boot. It is offered in a 0° version with a choice of 0-6000psi imperial or 0-400bar metric pressure scales. The SCUBAPRO Standard Pressure Gauge is a classic, highly reliable analog submersible pressure gauge (SPG) designed to provide divers with clear and accurate tank pressure readings throughout every stage of a dive. Housed in a durable plastic case and protected by a rugged rubber shock-proof boot, this gauge delivers dependable performance for both recreational and technical diving applications. It is available in either a 0-400 bar metric version (05.011.112) or a 0-6000 PSI imperial version (05.011.122) and comes complete with a high-pressure hose and protective boot. Built around SCUBAPRO's reputation for reliability, the Standard Pressure Gauge offers a simple, easy-to-read display, allowing divers to instantly monitor remaining breathing gas underwater. Its traditional mechanical design requires no batteries and continues to be trusted by dive schools, rental fleets, experienced recreational divers, and technical divers worldwide
Full-Sized Luminous Dial: Oversized glow-in-the-dark face with large numerical font guarantees effortless pressure monitoring during low-visibility, cave, or night diving operations.
Chrome-Plated Solid Brass Casing: Rugged metal body protects the precision Bourdon tube mechanism against crushing, impact, and high-pressure surges.
Heavy-Duty Rubber Boot with Loop: Protective shock-absorbing boot cushions the gauge head against drops and deck impacts, featuring a top loop for secure attachment to BCD retractors or clips.
High-Visibility Red Reserve Zone: Boldly highlighted red warning sector ($0 - 50 ext{ bar}$ or $0 - 700 ext{ psi}$) provides immediate visual alert when reaching critical reserve gas levels.
Integrated Safety Over-Pressure Valve: Safety relief diaphragm on the back of the case safely releases excess pressure in the rare event of an internal high-pressure spool breach.
Operational Tips & Pro Tricks
Streamlined Console Attachment: Avoid letting the gauge dangle freely beneath your body where it can impact marine life or collect sand. Use a bolt snap or retractable lanyard connected to the top loop of the rubber boot to secure the gauge to a left-side hip or chest D-ring.
Spool Pin & Air-Leak Servicing: Small bubbles escaping from the swivel connection between the hose and gauge indicate worn micro O-rings on the internal air spool (swivel pin). Have these two air spool O-rings replaced during annual regulator servicing.
Analog Backup for Air Integration: Even when using advanced wireless air-integrated dive computers, maintaining a standard mechanical SPG connected to a high-pressure port guarantees uninterrupted pressure monitoring if computer batteries fail or wireless connection drops mid-dive.
Post-Dive Salt Removal: Thoroughly submerge and soak the gauge assembly in fresh water after every dive day. Gently peel back the rubber boot edges during rinsing to flush out trapped sand particles and salt crystals that can pit the chrome-plated brass casing.
| Product Category | Gauges |
| SKU | SCU-05.011.1X2 |
| Condition | New |
| Brand | ScubaPro |
| Migration Gauges | Pressure Only |
| More Info | TECH SPECS: MANUFACTURER - SCUBAPRO / Johnson Outdoors MODEL / SKU - Standard Submersible Pressure Gauge (with Hose & Boot) METRIC VARIANT (Bar) = SKU: 05.011.112 / SCU-05.011.112 (Scale: 0 - 400 bar) IMPERIAL VARIANT (PSI) = SKU: 05.011.122 / SCU-05.011.122 (Scale: 0 - 6000 psi) HOUSING MATERIAL - Chrome-Plated Brass Body in Impact-Resistant Rubber Boot PRESSURE MECHANISM - Precision Copper-Beryllium Bourdon Tube HIGH-PRESSURE HOSE = 32 in (80 cm) HP Hose with Standard 7/16-inch Thread PRIMARY APPLICATION - Primary recreational gauge, training center fleet rig, backup SPG for transmitter setups
Operational Tips & Pro Tricks
|
By Rodney Smith on December 02, 2019 Verified Buyer
GREAT BRAND AT A GOOD PRICE!
By David Pettis on December 09, 2023 Verified Buyer
See above
Thank you for taking the time to provide us with your feedback