![]() |
Need help?
|
|
|||||||||
| |||||||||||
The Trident Rubber Dust Cap (SKU: RP17 / TRI-RP17) is a molded elastomeric dust plug designed to seal and protect the high-pressure air inlet of a standard scuba yoke (A-clamp) first-stage regulator between dives.
By clamping directly inside the regulator's yoke assembly, it prevents water, salt crystals, sand, and debris from entering the sintered metal inlet filter during post-dive rinsing, storage, and transport.
Help protect your scuba regulator from dirt, dust, and unwanted contamination with the Trident Rubber Dust Cap RP17. This practical regulator accessory is designed for use with yoke-style first stages, covering the regulator's exposed inlet area when the regulator is not attached to a scuba cylinder.
A regulator's first-stage inlet is an important connection point. Keeping it protected between dives and during equipment storage helps reduce the chance of dust, sand, and other debris reaching the inlet area. The Trident RP17 provides a simple protective cover that is easy to use and convenient to keep with your regulator equipment. Made from flexible rubber, this dust cap is designed to fit over the appropriate yoke first-stage opening. Its straightforward design makes it a useful replacement for a missing, worn, or damaged regulator dust cover.
Whether you are storing your regulator at home, transporting it in a dive bag, or organizing equipment between dives, the Trident Rubber Dust Cap is a small but important accessory for routine regulator care.
Important: This model is listed for yoke first stages. It is not a scuba tank valve cap and should not be used as a pressure-bearing plug or as a substitute for the correct DIN regulator protective cap.
One-Piece Molded Rubber Construction: Crafted from durable, flexible black rubber that resists cracking, UV exposure, and saltwater degradation without needing separate glued-on lanyards or O-rings.
Conical Yoke Screw Seat: The back of the plug features a tapered, dimpled cone engineered to accept the tip of a standard yoke screw, allowing the regulator's own clamp mechanism to lock the cap tightly against the inlet.
Integrated Retention Strap & Loop: Includes a built-in rubber tether with a ring on the opposite end that slips directly over a low-pressure or high-pressure regulator hose, keeping the cap permanently attached to your rig so it cannot be misplaced on a boat deck.
Flush, Watertight Inlet Seal: The soft rubber face compresses directly against the regulator's inlet nipple, creating a reliable moisture barrier when submerged in a rinse tank.
Universal Yoke Compatibility: Fits virtually all standard international yoke (CGA 850) first-stage scuba regulators regardless of brand.
Regulator Inlet Protection: Covers the exposed inlet area of a compatible yoke first stage when the regulator is not connected to a cylinder.
Flexible Rubber Construction: Designed to fit over the appropriate regulator opening.
Helps Keep Debris Out: Helps reduce exposure to dust, dirt, sand, and other contaminants during storage and transport.
Simple Installation: Easy to place over the yoke first-stage inlet when the regulator is disconnected.
Compact Design: Small and lightweight, making it easy to keep with your regulator.
Replacement Accessory: Useful for replacing a lost, worn, or damaged regulator dust cap.
Practical Equipment Care: Helps maintain cleaner regulator equipment between dives.
The RP17 is intended for a compatible yoke-style regulator first stage.
It is not designed to seal a pressurized scuba cylinder valve.
Never install or remove a regulator dust cap while the regulator is connected to a pressurized cylinder.
Do not substitute this cap for a DIN regulator protective cap.
A dust cap is intended to help keep contaminants away; it does not make a wet or contaminated regulator safe to use.
Follow the regulator manufacturer's cleaning, drying, and maintenance instructions.
| Product Category | Accessories |
| SKU | TRI-RP17 |
| Stock | 10 |
| Condition | New |
| Brand | Trident |
| More Info | TECH SPECS:
Tips & Tricks
How to Use the Trident RP17 Dust Cap
|